Logo

SAE J826 (JUN2021)

Current Revision

Devices for Use in Defining and Measuring Vehicle Seating Accommodation

$135.00

$135.00

$243.00


Sub Total (1 Item(s))

$ 0.00

Estimated Shipping

$ 0.00

Total (Pre-Tax)

$ 0.00


Document Preview Not Available...

The devices of this SAE Standard provide the means by which passenger compartment dimensions can be obtained using a deflected seat rather than a free seat contour as a reference for defining seating space. All definitions and dimensions used in conjunction with this document are described in SAE J1100. These devices are intended only to apply to the driver side or center occupant seating spaces and are not to be construed as instruments which measure or indicate occupant capabilities or comfort. This document covers only one H-point machine installed on a seat during each test. Certified H-point templates and machines can be purchased from: SAE International 400 Commonwealth Drive Warrendale, PA 15096-0001 Specific procedures are included in Appendix A for seat measurements in short- and long-coupled vehicles and in Appendix B for measurement of the driver seat cushion angle. Specifications and a calibration inspection procedure for the H-point machine are given in Appendix C . Additional considerations are necessary when a head restraint measuring device (HRMD) is mounted to an H-point machine ( Appendix D ).

SDO SAE: SAE International
Document Number J826
Publication Date June 22, 2021
Language en - English
Page Count 34
Revision Level 202106
Supercedes
Committee
Publish Date Document Id Type View
June 22, 2021 J826_202106 Revision
Nov. 10, 2015 J826_201511 Revision
Nov. 11, 2008 J826_200811 Revision
March 27, 2008 J826_200803 Revision
June 1, 2002 J826_200206 Revision
July 1, 1995 J826_199507 Revision
June 1, 1992 J826_199206 Revision
June 1, 1991 J826_199106 Revision
May 1, 1987 J826_198705 Revision
April 1, 1980 J826_198004 Revision