Logo

SAE J2488 (JUL2019)

Current Revision

SAE No. 2 Friction Test Machine 6000 rpm Stepped Power Test

$124.00

$124.00

$223.20


Sub Total (1 Item(s))

$ 0.00

Estimated Shipping

$ 0.00

Total (Pre-Tax)

$ 0.00


Document Preview Not Available...

This SAE Recommended Practice is intended as the definition of a standard test, but may be subject to frequent change to keep pace with experience and technical advances. This should be kept in mind when considering its use. The SAE No. 2 Friction Test Machine is used to evaluate the friction characteristics of automatic transmission plate clutches with automotive transmission fluids. It can also be used to conduct durability tests on wet friction systems. The specific purpose of this document is to define a 6000 rpm stepped power test for the evaluation of wet friction system performance variation as a function of power level. This procedure uses an initial engagement speed of 6000 rpm and is intended as a standard procedure for common use by both suppliers and end users. The only variables selected by the supplier or user of the friction system are: a Friction material b Fluid c Reaction plates These three variables must be clearly identified when reporting the results of using this test. If any of the test parameters or system hardware as described in this document are changed, other than the friction material, test fluid, or reaction plates, the data may not be reported as having been obtained using this document. This procedure is not intended to evaluate the initial coefficient or break-in characteristics. For this information, refer to SAE J2490 SAE No. 2 Friction Test Machine μPVT test.

SDO SAE: SAE International
Document Number J2488
Publication Date July 24, 2019
Language en - English
Page Count 25
Revision Level 201907
Supercedes
Committee
Publish Date Document Id Type View
July 24, 2019 J2488_201907 Revision
March 11, 2013 J2488_201303 Revision
Aug. 16, 2006 J2488_200608 Revision
April 26, 2000 J2488_200004 Revision