Logo

SAE J1453 (JAN2009)

Current Revision

Fitting--O-Ring Face Seal

$141.00

$141.00

$253.80


Sub Total (1 Item(s))

$ 0.00

Estimated Shipping

$ 0.00

Total (Pre-Tax)

$ 0.00


Document Preview Not Available...

This SAE Standard covers material, dimensional, and performance requirements of steel O-ring face seal fittings for tubing and the O-ring face seal interface and nut portion of hose stem assemblies for nominal tube or hose diameters 6.35 mm (0.250 in) through 38.1 mm (1.500 in). These fittings are intended for general application and hydraulic systems on industrial equipment and commercial products, where elastomeric seals are acceptable to overcome leakage and variations in assembly procedures. These fittings are capable of providing leak-proof full flow connections in hydraulic systems operating from 95 kPa (28 in Hg) vacuum to working pressures shown in Table 1 . Since many factors influence the pressure at which a hydraulic system will or will not perform satisfactorily, these values should not be construed as guaranteed minimums. For any application, it is recommended that sufficient testing be conducted and reviewed by both the user and manufacturer to assure that required performance levels will be safe. See Figure 1 . The rated working pressure of a fluid conductor assembly using SAE J1453 hose stem connections or formed tube connection per Figure 32a , shall not exceed rated working pressure of the lowest rated component thereof.

SDO SAE: SAE International
Document Number J1453
Publication Date Jan. 13, 2009
Language en - English
Page Count 41
Revision Level 200901
Supercedes
Committee
Publish Date Document Id Type View
Jan. 13, 2009 J1453_200901 Revision
June 19, 2002 J1453_200206 Revision
June 1, 1998 J1453_199806 Revision
May 1, 1997 J1453_199705 Revision
June 1, 1996 J1453_199606 Revision
June 1, 1994 J1453_199406 Revision
June 1, 1993 J1453_199306 Revision
June 1, 1992 J1453_199206 Revision
June 1, 1991 J1453_199106 Revision
June 1, 1989 J1453_198906 Revision
Jan. 1, 1988 J1453_198801 Revision
July 1, 1987 J1453_198707 Revision
Feb. 1, 1987 J1453_198702 Revision