Logo

SAE J1394 (JUN2013)

Current Revision

Metric Nonmetallic Air Brake System Tubing

$79.00

$79.00

$142.20


Sub Total (1 Item(s))

$ 0.00

Estimated Shipping

$ 0.00

Total (Pre-Tax)

$ 0.00


Document Preview Not Available...

This SAE Standard covers the minimum requirements for metric sizes of nonmetallic tubing as manufactured for use in air brake systems. Nonreinforced products are designated type A and reinforced products type B. It is not intended to cover tubing for any portion of the system that operates below -40 °C (-40 °F), above +93 °C (+200 °F), above a maximum working gage pressure of 1.0 MPa (150 psi), or in an area subject to attack by battery acid. This tubing is intended for use in the brake system for connections that maintain a basically fixed relationship between components during vehicle operation. Coiled tube assemblies required for those installations where flexing occurs are covered by this standard and SAE J1131 to the extent of setting minimum requirements on the essentially straight tube and tube fitting connections, which are used in the construction of such assemblies. 2x NOTE—As all elements of SAE J1394 are being merged into SAE J844, two separate documents are no longer required; therefore, SAE J1394 will be cancelled in July, 2005.

SDO SAE: SAE International
Document Number J1394
Publication Date June 11, 2013
Language en - English
Page Count 8
Revision Level 201306
Supercedes
Committee
Publish Date Document Id Type View
June 11, 2013 J1394_201306 Revision
June 30, 2004 J1394_200406 Revision
April 1, 2000 J1394_200004 Revision
April 1, 1991 J1394_199104 Revision
May 1, 1989 J1394_198905 Revision
April 1, 1983 J1394_198304 Revision