Logo

SAE J1265 (MAY2003)

Current Revision

Capacity Rating--Dozer Blades

$69.00

$69.00

$124.20


Sub Total (1 Item(s))

$ 0.00

Estimated Shipping

$ 0.00

Total (Pre-Tax)

$ 0.00


Document Preview Not Available...

This standard applies only to straight, angling, semi-U, and U-blades for crawler and wheel tractors. It applies to angling blades only in the straight (not angled) position. This standard does not apply to angled blades or other tools used to side cast materials, nor does it apply to any blade with design features such as end plates extended beyond the blade face. This standard assumes the blade face to be flat and vertical, and does not consider the blade included volume (Figure 1). Although provisions are presented for some deviations, this standard is intended for rectangular blades whose width/height ratios are at least 1.0. Purpose The purpose of this standard is to provide a uniform method for calculating the capacities of dozer blades. It is intended for relative comparisons of dozer blade capacity, and not for predicting capacities or productivities in actual field conditions. Such determinations would need to consider other parameters, such as efficiency of the blade design, tractor power, tractive effort, soil properties, terrain, operator technique, and duty cycle.

SDO SAE: SAE International
Document Number J1265
Publication Date May 8, 2003
Language en - English
Page Count 6
Revision Level 200305
Supercedes
Committee
Publish Date Document Id Type View
May 8, 2003 J1265_200305 Revision
March 1, 1988 J1265_198803 Revision
May 1, 1986 J1265_198605 Revision
Feb. 1, 1980 J1265_198002 Revision