Logo

SAE J1095 (MAY2021)

Current Revision

Fatigue Test Procedures: Hubs and Wheels for Demountable Rims

$87.00

$87.00

$156.60


Sub Total (1 Item(s))

$ 0.00

Estimated Shipping

$ 0.00

Total (Pre-Tax)

$ 0.00


Document Preview Not Available...

This SAE Recommended Practice provides uniform laboratory procedures for fatigue testing of wheels for demountable rims and hubs intended for normal highway use on trucks, buses, truck trailers, and multipurpose passenger vehicles. The hubs included have bolt circle diameters ranging from 165.1 to 335.0 mm (6.500 to 13.189 inches). It is up to each hub and/or wheel for demountable rims manufacturer to determine the appropriate test method, accelerated load factor and cycle life requirements applicable to obtain satisfactory service life for a given application. When deviations from the procedures recommended herein are made, it is the responsibility of the hub and/or wheel for demountable rims developer to modify other parameters as necessary to ensure satisfactory service life for the intended application. It should be noted that this test procedure focuses on fatigue resulting from vehicle loading and cornering forces. It does not consider loads imparted to the hub from braking events.

SDO SAE: SAE International
Document Number J1095
Publication Date May 6, 2021
Language en - English
Page Count 10
Revision Level 202105
Supercedes
Committee
Publish Date Document Id Type View
May 6, 2021 J1095_202105 Revision
June 30, 2016 J1095_201606 Revision
Oct. 12, 2009 J1095_200910 Revision
March 7, 2003 J1095_200303 Revision
March 1, 1995 J1095_199503 Revision
Jan. 1, 1991 J1095_199101 Revision
March 1, 1986 J1095_198603 Revision
June 1, 1982 J1095_198206 Revision