Logo

ISO/IEC 13241:1997

Current Revision

Information technology - Telecommunications and information exchange between systems - Private Integrated Services Network - Inter-exchange signalling protocol - Route Restriction Class additional network feature

$124.00

$124.00

$210.80


Sub Total (1 Item(s))

$ 0.00

Estimated Shipping

$ 0.00

Total (Pre-Tax)

$ 0.00


Document Preview Not Available...

This International Standard specifies the signalling protocol for the support of the Route Restriction Class (RRC) additional network feature (ANF-RRC) at the Q reference point between Private Integrated Services Network Exchanges (PINXs) connected together within a Private Integrated Services Network (PISN).

ANF-RRC is a feature which applies in the establishment phase of a call, allowing that call to access facilities that are within an allowable restriction range.

The Q reference point is defined in ISO/IEC 11579-1.

Service specifications are produced in three stages and according to the method specified in CCI'IT Recommendation I.130. This International Standard contains the stage 3 specification for the Q reference point and satisfies the requirements identified by the stage 1 and stage 2 specifications in ISO/IEC 13242.

The signalling protocol for ANF-RRC operates on top of the signalling protocol for basic circuit switched call control, as specified in ISO/IEC 11572, and uses certain aspects of the generic procedures for the control of supplementary services specified in ISO/IEC 11582.

This International Standard also specifies additional signalling protocol requirements for the support of interactions at the Q reference point between ANF-RRC and other supplementary services and ANFs.

This International Standard is applicable to PINXs which can interconnect to form a PISN.


SDO ISO: International Organization for Standardization
Document Number ISO/IEC 13241
Publication Date Not Available
Language en - English
Page Count
Revision Level
Supercedes
Committee ISO/IEC JTC 1/SC 6
Publish Date Document Id Type View
Not Available ISO/IEC 13241:1997 Revision