Logo

ISO 7093-1:2000

Current Revision

Plain washers -- Large series -- Part 1: Product grade A

$54.00

$54.00

$91.80


Sub Total (1 Item(s))

$ 0.00

Estimated Shipping

$ 0.00

Total (Pre-Tax)

$ 0.00


Stay effortlessly up-to-date with the latest standard revisions. When new versions are released, they're automatically charged and delivered to you, ensuring seamless compliance.

Document Preview Not Available...

This part of ISO 7093 specifies the characteristics of large-series, product-grade-A plain washers in the 200 HV and 300 HV hardness classes and of nominal sizes (nominal thread diameters) ranging from 1,6 mm to 64 mm inclusive.

Washers conforming to this part of ISO 7093 are intended for use in cases where soft material pieces are to be clamped or where there are large clearance holes in the workpiece. Nevertheless, in the latter case, the suitability of the washer thickness should be checked.

Washers of hardness class 200 HV are suitable for

  • hexagon bolts and screws of product grades A and B in property classes up to and including 8.8;
  • hexagon nuts of product grades A and B in property classes up to and including 8;
  • hexagon bolts, screws and nuts of stainless steel of similar chemical composition;
  • case-hardened thread rolling screws.

Washers of hardness class 300 HV are suitable for

  • hexagon bolts and screws of product grades A and B in property classes up to and including 10.9;
  • hexagon nuts of product grades A and B in property classes up to and including 10.

If dimensions other than those listed in this part of ISO 7093 are required, they should be selected from those given in ISO 887.


SDO ISO: International Organization for Standardization
Document Number ISO 7093
Publication Date Not Available
Language en - English
Page Count
Revision Level
Supercedes
Committee ISO TC 2/WG 6
Publish Date Document Id Type View
Not Available ISO 7093-1:2000 Revision