Logo

ISO 7090:2000

Current Revision

Plain washers, chamfered -- Normal series -- Product grade A

$54.00

$54.00

$91.80


Sub Total (1 Item(s))

$ 0.00

Estimated Shipping

$ 0.00

Total (Pre-Tax)

$ 0.00


Stay effortlessly up-to-date with the latest standard revisions. When new versions are released, they're automatically charged and delivered to you, ensuring seamless compliance.

Document Preview Not Available...

This International Standard specifies the characteristics of normal-series, product-grade-A plain washers chamfered at the outside diameter, in the 200 HV and 300 HV hardness classes and of nominal sizes (nominal thread diameters) ranging from 5 mm to 64 mm inclusive.

Washers of hardness class 200 HV are suitable for

  • bolts and screws of product grades A and B in property classes up to and including 8.8;
  • nuts of product grades A and B in property classes up to and including 8;
  • bolts, screws and nuts of stainless steel of similar chemical composition;
  • case-hardened thread rolling screws.

Washers of hardness class 300 HV are suitable for

  • bolts and screws of product grades A and B in property classes up to and including 10.9;
  • nuts of product grades A and B in property classes up to and including 10.

If dimensions other than those listed in this International Standard are required, they should be selected from those given in ISO 887.

When soft material pieces are clamped, or large clearance holes in the workpiece are used, the user should check the technical suitability of this type of washer.


SDO ISO: International Organization for Standardization
Document Number ISO 7090
Publication Date Not Available
Language en - English
Page Count
Revision Level
Supercedes
Committee ISO TC 2/WG 6
Publish Date Document Id Type View
Not Available ISO 7090:2000 Revision