Logo

ISO/TR 19688:2019

Current Revision

Rotodymanic pumps - Hydraulic performance acceptance test using a model pump

$223.00

$223.00

$379.10


Sub Total (1 Item(s))

$ 0.00

Estimated Shipping

$ 0.00

Total (Pre-Tax)

$ 0.00


Document Preview Not Available...

This document describes hydraulic performance tests (including cavitation tests) using a small size pump (centrifugal, mixed flow or axial pump, hereinafter referred to as a "model pump").

This document is used for pump acceptance tests with a geometrically similar model pump to guarantee the performance of a large size pump manufactured for practical use (hereinafter, a "prototype pump"). This document, however does not preclude a temporary assembly inspection or other tests on the prototype pump. Moreover, it is preferable to conduct the tests with prototype pumps unless

— the capacity of the pump, namely its flow rate and/or its power input, is beyond the limitations of the test facility, though it is difficult to set a criterion for carrying out a model pump test instead of the prototype pump test in terms of the volume rate of flow or the power input,

— a part of the pump is to be constructed by concrete walls and reproduction of the whole assembly is impractical,

— model tests are specified by the purchaser, or

— it is difficult to carry out the prototype pump test due to any other reasons.

This document applies to performance tests under steady operating conditions corresponding to the prototype pump.


SDO ISO: International Organization for Standardization
Document Number ISO/TR 19688
Publication Date Not Available
Language en - English
Page Count
Revision Level
Supercedes
Committee ISO/TC 115/SC 2
Publish Date Document Id Type View
Not Available ISO/TR 19688:2019 Revision