IEEE C62.69-2016

Current Revision

IEEE Standard for the Surge Parameters of Isolating Transformers Used in Networking Devices and Equipment

Online PDF

$65.00

$80.00

Bundle

$130.50

Sub Total (1 Item(s))

$ 0.00

Estimated Shipping

$ 0.00

Total (Pre-Tax)

$ 0.00

I have read and agree to the Terms & Conditions

Document Preview Not Available...

Document Information

New IEEE Standard - Active. Terms, test methods, test circuits, measurement procedures, and preferred result values for the surge mitigation parameters of isolating transformers used in networking devices and equipment are set in this standard. Three types of isolating transformer are considered: mains low frequency power, high frequency power (switching mode power supplies) and signal (e.g., Ethernet data).
This standard sets terms, test methods, test circuits, measurement procedures, and preferred result values for the surge parameters of isolating transformers used in networking devices and equipment. Three types of isolating transformer are considered: mains low frequency power, high frequency power (switching mode power supplies) and signal (e.g., Ethernet data). The surge parameters of the isolating transformer insulation barrier covered by this standard are as follows: - Rated impulse voltage - Input winding to output winding capacitance - Insulation resistance Additional parameters for signal isolating transformers are as follows: - Core saturation voltage-time product - Rated input winding rms current for a given temperature rise This standard does not cover the transformer parameters required to help ensure appropriate operation on the service (e.g., signal transformer return loss).
The main purpose of this standard is to define a series of transformer impulse withstand voltage ratings that are higher than those of IEEE Std 802.3™ [B21]1 with the intent to improve transformer insulation performance in uncontrolled environments. In the interests of international standardization, the voltage values used are harmonized with the series defined in IEC 60664-1[B11] for low-voltage equipment insulation coordination. This IEEE standard is applicable to home networking installations, which are typically uncontrolled environments, where the surge voltage levels and the corresponding required transformer impulse withstand voltages can be higher than the LAN A controlled environment as defined by IEEE Std 802.3(TM)[B21].


SDO	IEEE: Institute of Electrical and Electronics Engineers
Document Number	C62.69
Publication Date	Aug. 15, 2016
Language	en - English
Page Count	36
Revision Level
Supercedes
Committee	Surge Protective Devices/Low Voltage

Publish Date	Document Id	Type	View
Aug. 15, 2016	C62.69-2016	Revision

SDO	Document	Title
IEEE	IEEE C62.62	IEEE Standard Test Specifications for Surge-Protective Devices (SPDs) for Use on the Load Side of the Service Equipment in Low-Voltage (1000 V and Less) AC Power Circuits
IEEE	IEEE C62.64	IEEE Standard Specifications for Surge Protectors Used in Low-Voltage Data, Communications,and Signaling Circuits
IEEE	IEEE C57.12.40	IEEE Standard for Network, Three-Phase Transformers, 2500 kVA and Smaller; High Voltage, 34 500 V and Below; Low Voltage, 600 V and Below; Subway and Vault Types (Liquid Immersed)
IEEE	IEEE 1920.1	IEEE Trial-Use Standard for Aerial Network Communication
IEEE	IEEE 351	IEEE Trial Use Standard Guide on Solid State Devices: Varactor Measurements Part II - Characterization of Large-Signal Devices
IEEE	IEEE 318	IEEE Trial Use Standard Guide on Solid State Devices: Varactor Measurements Part 1- Small Signal Measurements
IEEE	IEEE 262B	IEEE Trial Use Standard Dielectric Test Requirements for Power Transformers for Operation on Effectively Grounded Systems 345 kV and Above
IEEE	ANSI/IEEE 762	IEEE Trial use Standard Definitions for Use in Reporting Electric Generating Unit Reliability, Availability, and Productivity
IEEE	IEEE 1101.10	IEEE Standard for Additional Mechanical Specifications for Microcomputers Using the IEEE 1101.1-1998 Equipment Practice
IEEE	IEEE 1101.11	IEEE Standard for Mechanical Rear Plug-in Units Specifications for Microcomputers Using IEEE 1101.1 and IEEE 1101.10 Equipment Practice
IEEE	IEEE 11073-10700	IEEE Standard -- Health Informatics--Device Interoperability Part 10700: Point‐of‐Care Medical Device Communication--Standard for Base Requirements for Participants in a Service‐Oriented Device Connectivity (SDC) System
IEEE	IEEE 388	IEEE Standard for Transformers and Inductors in Electronic Power Conversion Equipment
IEEE	IEEE C37.238	IEEE Standard Profile for Use of IEEE 1588 Precision Time Protocol in Power System Applications
BSI	BS EN 61643-351	Components for low-voltage surge protective devices. Performance requirements and test methods for telecommunications and signalling network surge isolation transformers (SIT)
IEEE	IEEE C62.36	IEEE Standard Test Methods for Surge Protectors and Protective Circuits Used in Information and Communications Technology (ICT) Circuits, and Smart Grid Data Circuits
IEEE	IEEE C62.34	IEEE Standard for Test Methods and Performance of Low-Voltage (1000 V rms or Less) Surge Protective Devices Used on Secondary Distribution Systems (Between the Transformer Low-Voltage Terminals and the Line Side of the Service Equipment)
IEEE	IEEE 1815.1	IEEE Standard for Exchanging Information Between Networks Implementing IEC 61850 and IEEE Std 1815(TM) [Distributed Network Protocol (DNP3)]
IEEE	IEEE C57.12.14	IEEE Trial-Use Standard for Dielectric Test Requirements for Power Transformers for Operation at System Voltages from 115 kV Through 230 kV
IEEE	IEEE 600	IEEE Trial-Use Standard Requirements for Organizations that Conduct Qualification Testing of Safety Systems Equipment for Use in Nuclear Power Generating Stations
IEEE	IEEE 1641.1	IEEE Guide for the Use of IEEE Std 1641, IEEE Standard for Signal and Test Definition
IEEE	IEEE 1076/INT	IEEE Standards Interpretations: IEEE Std 1076-1987, IEEE Standard VHDL Language Reference Manual
IEEE	IEEE 465.1	IEEE Standard Test Specifications for Gas Tube Surge Protecting Devices
IEEE	IEEE C37.13.1	IEEE Standard for Definite-Purpose Switching Devices for Use in Metal-Enclosed Low-Voltage (600 V AC and Below) Power Circuit Breaker Switchgear
IEEE	IEEE C62.37	IEEE Standard Test Specification for Thyristor Diode Surge Protective Devices
IEC	IEC 61643-351	Components for low-voltage surge protective devices - Part 351: Performance requirements and test methods for telecommunications and signalling network surge isolation transformers (SIT)

IEEE C62.69-2016

IEEE Standard for the Surge Parameters of Isolating Transformers Used in Networking Devices and Equipment

Document Information

Overview

Revision Details

Document History

IEEE C62.69-2016

IEEE Standard for the Surge Parameters of Isolating Transformers Used in Networking Devices and Equipment

Document Information

Overview

Revision Details

Document History

Related Documents

Log In

Welcome Back!

Register

Create an Account

Reset Password

Forget Password?

Reset Password Email Sent

Email Sent

Terms of Service

Conditions of Use

Privacy Policy

Copyright

Communications

Privacy Policy

Verification Email Sent

Verification Email Sent

We use cookies

Manage Cookie Preferences

Essential Cookies Required (3 cookies)

Performance Cookies (2 cookies)