Logo

IEEE C62.37-1996

Current Revision

IEEE Standard Test Specification for Thyristor Diode Surge Protective Devices

$151.00


Sub Total (1 Item(s))

$ 0.00

Estimated Shipping

$ 0.00

Total (Pre-Tax)

$ 0.00


Stay effortlessly up-to-date with the latest standard revisions. When new versions are released, they're automatically charged and delivered to you, ensuring seamless compliance.

Document Preview Not Available...

New IEEE Standard - Inactive-Reserved. This standard applies to two or three terminal, four or five layer, thyristor surge protection devices (SPDs) for application on systems with voltages equal to or less than 1000 V rms or 1200 V dc.
This standard applies to two or three terminal, four or five layer, thyristor surge protection devices (SPDs) for application on systems with voltages equal to or less than 1000 V rms or 1200 V dc. These protective devices are designed to limit voltage surges on communication circuits and on power circuits operating from direct current (dc) to 420 Hz. The thyristor SPD can be manufactured with unidirectional or bidirectional, symmetrical, or asymmetrical V-I characteristics. This standard contains definitions, service conditions, and a series of test criteria for determining the characteristics of a thyristor SPD. If the characteristics differ with the direction of conduction, each polarity shall be separately specified.

SDO IEEE: Institute of Electrical and Electronics Engineers
Document Number C62.37
Publication Date Nov. 30, 1996
Language en - English
Page Count 60
Revision Level
Supercedes
Committee Surge Protective Devices/Low Voltage
Publish Date Document Id Type View
Nov. 30, 1996 C62.37-1996 Revision