Logo

IEEE C57.19.00-1991

Historical Revision

IEEE Standard General Requirements and Test Procedure for Power Apparatus Bushings

$133.00


Sub Total (1 Item(s))

$ 0.00

Estimated Shipping

$ 0.00

Total (Pre-Tax)

$ 0.00


Stay effortlessly up-to-date with the latest standard revisions. When new versions are released, they're automatically charged and delivered to you, ensuring seamless compliance.

Document Preview Not Available...

Revision Standard - Superseded. Service conditions, rating, general requirements, and test procedures for outdoor apparatus bushings are set forth. They apply to outdoor power apparatus bushings that have basic impulse insulation levels of 110 kV and above for use as components of oil-filled transformers, oil-filled reactors, and oil circuit breakers. The following are not covered: high-voltage-cable terminations (potheads), bushings for instrument transformers, bushings for test transformers, bushings in which the internal insulation is provided by a gas, bushings applied with gaseous insulation (other than air at atmospheric pressure) external to the bushing, bushings for distribution-class circuit breakers and transformers, bushings for automatic circuit reclosures and line sectionalizers, and bushings for oil-less and oil-poor apparatus.
This standard applies to outdoor power apparatus bushings that have basic impulse insulation levels of 110 kV and above for use as components of oil-filled transformers, oil-filled reactors, and oil circuit breakers. This standard does not apply to the following: (1) High-voltage cable terminations (potheads); (2) Bushings for instrument transformers; (3) Bushings for test transformers; (4) Bushings in which the internal insulation is provided by a gas; (5) Bushings applied with gaseous insulation (other than air at atmospheric pressure) external to the bushing; (6) Bushings for distribution-class circuit breakers and transformers; (7) Bushings for automatic circuit reclosures and line sectionalizers; (8) Bushings for oil-less and oil-poor apparatus
This standard defines the special terms used, service conditions, rating, general requirements, and test procedure for outdoor apparatus bushings. See IEEE C57.19.01-1991 for specific listings of values of electrical and mechanical characteristics, dimensions, and other related requirements that are defined or described in this standard.

SDO IEEE: Institute of Electrical and Electronics Engineers
Document Number C57.19.00
Publication Date June 17, 1992
Language en - English
Page Count 28
Revision Level
Supercedes
Committee Transformers
Publish Date Document Id Type View
June 8, 2005 C57.19.00-2004 Revision
June 17, 1992 C57.19.00-1991 Revision