Logo

IEEE C57.12.56-1986

Current Revision

IEEE Standard Test Procedure for Thermal Evaluation of Insulation Systems for Ventilated Dry-Type Power and Distribution Transformers

$113.00


Sub Total (1 Item(s))

$ 0.00

Estimated Shipping

$ 0.00

Total (Pre-Tax)

$ 0.00


Stay effortlessly up-to-date with the latest standard revisions. When new versions are released, they're automatically charged and delivered to you, ensuring seamless compliance.

Document Preview Not Available...

New IEEE Standard - Superseded. This IEEE Standards product is part of the C57 family on Power Distribution and Regulating Transformers. A test procedure for determining the temperature classification of ventilated dry-type power and distribution transformer insulation systems by test rather than by chemical composition is established. The intent is to provide a uniform method for providing data for selection of the temperature classification of the insulation system, for providing data that may be used as a basis for a loading guide, and for comparative evaluation of different insulation systems. Voltage-withstand endpoint criteria are related to the impulse voltage distribution within the coil or to the initial voltage-withstand of the coil. A relationship between impulse withstand of the insulation and short-term 60-Hz-withstand is identified so that 50/60--Hz testing of model coils is possible.
This standard is intended to establish a uniform method for determining the temperature classification of ventilated dry-type power and distribution transformer insulation systems by test rather than by chemical composition. These insulation systems are intended for use in transformers listed in ANSI C57.12.50-1981 [1] and ANSI C57.12.51-1981 [2], and whose highest voltages exceed nominal 600 V. NOTE — In this standard, the term transformer shall be considered to mean ventilated dry-type transformer unless qualified by other descriptive terms.
The purpose of this standard is to establish a uniform method 1) For providing data for selection of the temperature classification of the insulation system 2) For providing data which may be used as a basis for a loading guide 3) For comparative evaluation of different insulation systems

SDO IEEE: Institute of Electrical and Electronics Engineers
Document Number C57.12.56
Publication Date Oct. 3, 1986
Language en - English
Page Count 20
Revision Level
Supercedes
Committee Transformers
Publish Date Document Id Type View
Oct. 3, 1986 C57.12.56-1986 Revision