Logo

IEEE C37.41-1994

Historical Revision

IEEE Standard Design Tests for High-Voltage (>1000 V) Fuses, Fuse and Disconnecting Cutouts, Distribution Enclosed Single-Pole Air Switches, Fuse Disconnecting Switches, and Fuse Links and Accessories Used with These Devices

$253.00


Sub Total (1 Item(s))

$ 0.00

Estimated Shipping

$ 0.00

Total (Pre-Tax)

$ 0.00


Document Preview Not Available...

Revision Standard - Superseded. Required procedures for performing design tests for high-voltage distribution-class and power-class fuses, as well as for fuse disconnecting switches and enclosed single-pole air switches are specified. These design tests, as appropriate to a particular device, include the following test types--dielectric, interrupting, load-break, making current, radio-influence, short-time current, temperature-rise, time-current, mechanical, and liquid-tightness.
This standard specifies design test requirements for high-voltage fuses (above 1000 V but also including fuses rated 601 V to 1000 V that were designed prior to 1985), distribution enclosed single-pole air switches, fuse disconnecting switches, and associated accessories, all of which are intended for use on ac distribution systems. These test requirements apply to the following equipment: a) Enclosed, open, and open-link types of distribution cutouts and fuses b) Distribution current-limiting fuses c) Distribution oil cutouts d) Distribution enclosed single-pole air switches e) Power fuses, including current-limiting types f) Fuses in enclosures g) Outdoor and indoor fuse disconnecting switches h) Fuse supports, fuse mountings, fuse hooks, and fuse links—all of the type used exclusively with products listed in a) through g) i) Removable switch blades for products listed in a) through c)

SDO IEEE: Institute of Electrical and Electronics Engineers
Document Number C37.41
Publication Date March 13, 1995
Language en - English
Page Count 80
Revision Level
Supercedes
Committee Switchgear
Publish Date Document Id Type View
March 13, 2009 C37.41-2008 Revision
Nov. 30, 2000 C37.41-2000 Revision
March 13, 1995 C37.41-1994 Revision
Aug. 14, 1989 C37.41-1988 Revision