Logo

IEEE C37.09-1979

Historical Revision

IEEE Standard Test Procedure for AC High-Voltage Circuit Breakers Rated on a Symmetrical Current Basis

$119.00


Sub Total (1 Item(s))

$ 0.00

Estimated Shipping

$ 0.00

Total (Pre-Tax)

$ 0.00


Stay effortlessly up-to-date with the latest standard revisions. When new versions are released, they're automatically charged and delivered to you, ensuring seamless compliance.

Document Preview Not Available...

New IEEE Standard - Superseded. The various tests that are made on AC high-voltage circuit breakers are summarized. Accepted methods used in making the tests are described, and the tests that will demonstrate ratings under ANSI/IEEE standards are specified. The following categories of tests are considered: design tests, production tests, tests after delivery, field tests, and conformance tests.
This test procedure summarizes the various tests which are made on ac high-voltage circuit breakers, describes accepted methods used in making the tests, and specifies the tests which will demonstrate ratings under ANSI/IEEE standards. It does not preclude the use of other equivalent or more effective methods of demonstrating ratings. The tests are divided into the following classifications --Design tests --Production tests --Tests after delivery --Field tests --Conformance tests
The purposes of the test procedure are:1) To establish that a circuit breaker of the design on test can perform satisfactorily, both electrically and mechanically, up to the ratings assigned to it; 2) To establish that production breakers have been adequately tested during manufacture and after assembly and that the breakers have characteristics essentially the same as the breaker of identical design which was subjected to design tests

SDO IEEE: Institute of Electrical and Electronics Engineers
Document Number C37.09
Publication Date Nov. 28, 1980
Language en - English
Page Count 60
Revision Level
Supercedes
Committee Switchgear
Publish Date Document Id Type View
March 28, 2000 C37.09-1999 Revision
Nov. 28, 1980 C37.09-1979 Revision