Logo

IEEE C135.64-2012

Current Revision

IEEE Guide for Slip and Pull-Out Strength Testing of Bolted Dead End Strain Clamps

$84.00


Sub Total (1 Item(s))

$ 0.00

Estimated Shipping

$ 0.00

Total (Pre-Tax)

$ 0.00


Stay effortlessly up-to-date with the latest standard revisions. When new versions are released, they're automatically charged and delivered to you, ensuring seamless compliance.

Document Preview Not Available...

New IEEE Standard - Inactive-Reserved. Test procedures for the slip and pullout strength certification testing of bolted dead end strain clamps for use on overhead transmission and distribution lines are covered by this guide.
This guide defines testing procedures for the slip and pull-out strength testing of bolted dead end strain clamps for use on transmission and distribution lines. This guide covers initial certification testing. For routine acceptance testing, refer to IEEE Std C135.61.
The purpose of this guide is to provide a repeatable and standardized methodology for performing mechanical slip and pull-out strength testing for a bolted dead end clamp and conductor combination. A bolted dead end clamp and conductor combination tested in accordance with this guide should give reasonable assurance to the user that the clamp and conductor combination will perform in a satisfactory manner, provided they have been installed in accordance with the manufacturer's recommendations.

SDO IEEE: Institute of Electrical and Electronics Engineers
Document Number C135.64
Publication Date June 8, 2012
Language en - English
Page Count 18
Revision Level
Supercedes
Committee Transmission and Distribution
Publish Date Document Id Type View
June 8, 2012 C135.64-2012 Revision