Logo

IEEE/ANSI C95.3-1973

Current Revision

American National Standard Techniques and Instrumentation for the Measurement of Potentially Hazardous Electromagnetic Radiation at Microwave Frequencies

$81.00


Sub Total (1 Item(s))

$ 0.00

Estimated Shipping

$ 0.00

Total (Pre-Tax)

$ 0.00


Stay effortlessly up-to-date with the latest standard revisions. When new versions are released, they're automatically charged and delivered to you, ensuring seamless compliance.

Document Preview Not Available...

- Superseded. This standard sets forth evaluation techniques and instrumentation to determine the existence of a potentially hazardous situation due to electromagnetic radiation. The scope includes hazards to flammable volatile materials and explosive devices. Emphasis is on techniques suitable for measuring power density at microwave frequencies. These techniques are generally applicable only in the far field, but reasonably accurate measurements can be made whenever the following necessary conditions are satisfied. (1) The transmitting antenna and any scattering objects must be in the far field of the receiving antenna. (2) The receiving antenna must be at least several 'aperture diameters' removed from the transmitting antenna and any scattering objects. (3) The transmitting antenna and any sources of multipath scattering must be contained within the main beam of the receiving antenna. Thus, leakage measurements and measurements in the reactive near field are specifically excluded. However, measurements can be made in the radiating near field with a receiving antenna which is small compared to the source antenna if the three conditions above are satisfied.
Subcommittee I on Techniques, Procedures, and Instrumentation was originally organized on April 7, 1960, to "Establish specifications for techniques and instrumentation used in eva1uating hazardous radio-frequency radiation." On January 8, 1963, the intent of the scope was clarified by specific reference to mankind, flammable volatile materials, and explosive devices; thus the purpose was extended to "Establish specifications for techniques and instrumentation to be used in evaluating radio-frequency hazards to mankind,flammable volatile materials, and explosive devices."

SDO IEEE: Institute of Electrical and Electronics Engineers
Document Number C95.3
Publication Date April 20, 1973
Language en - English
Page Count 38
Revision Level
Supercedes
Committee
Publish Date Document Id Type View
April 20, 1973 C95.3-1973 Revision