Logo

IEEE 518-1977

Historical Revision

IEEE Guide for the Installation of Electrical Equipment to Minimize Electrical Noise Inputs to Controllers from External Sources

$82.00


Sub Total (1 Item(s))

$ 0.00

Estimated Shipping

$ 0.00

Total (Pre-Tax)

$ 0.00


Stay effortlessly up-to-date with the latest standard revisions. When new versions are released, they're automatically charged and delivered to you, ensuring seamless compliance.

Document Preview Not Available...

New IEEE Standard - Superseded. The rapidly expanding use of solid-state controllers requires consideration of many factors not previously important in the design, installation, and operation of other forms of controllers. Many portions of the control circuits of solid-state controllers designed for operation at low-energy low voltage signal levels are susceptible to disturbances by excessive electrical noise. Erratic controller operation may result unless suitable precautions are taken. The following recommendations are intended as an installation guide for industrial controls involving low-energy level equipment to minimize electrical noise inputs from external sources. The electrical noise guide is comprised of six sections. Sections 1 and 2 state the scope and service conditions. Sections 3 through 5 provide the technical foundation for the recommendations given in Section 6. Section 6 is intended to stand alone as the working section of the electrical noise guide.
The purpose of this standard is to develop a guide for the installation and operation of industrial controllers to minimize the disturbing effects of electrical noise on these controllers.

SDO IEEE: Institute of Electrical and Electronics Engineers
Document Number 518
Publication Date April 29, 1977
Language en - English
Page Count 70
Revision Level
Supercedes
Committee
Publish Date Document Id Type View
Oct. 1, 1982 518-1982 Revision
April 29, 1977 518-1977 Revision