Logo

IEEE 1902.1-2009

Current Revision

IEEE Standard for Long Wavelength Wireless Network Protocol

$110.00

Sub Total (1 Item(s))

$ 0.00

Estimated Shipping

$ 0.00

Total (Pre-Tax)

$ 0.00

Stay effortlessly up-to-date with the latest standard revisions. When new versions are released, they're automatically charged and delivered to you, ensuring seamless compliance.

Document Preview Not Available...

New IEEE Standard - Inactive-Reserved. This standard defines the air interface for radiating transceiver radio tags using long wavelength signals (kilometric and hectometric frequencies, <450 kHz). Conforming devices can have very low power consumption (a few microwatts on average), while operating over medium ranges (0.5 to 30 meters) and at low data transfer speeds (300-9600 bits per s). They are well suited for visibility networks, sensors, effectors and battery operated displays. This standard fills a gap between non-network-based RFID standards (e.g., ISO/IEC CD 15961-3, ISO 18000-6C or 7) and existing high bandwidth network standards such as IEEE Std 802. IEEE 802.15.4
This standard defines the air interface for radiating transceiver radio tags using long wavelength signals(kilometric and hectometric frequencies, <450 kHz). Conforming devices can have very low power consumption (a few microwatts on average), while operating over medium ranges (0.5 to 30 meters) and at low data transfer speeds (300-9600 bps). They are well suited for visibility networks, sensors, effectors and battery operated displays. This standard fills a gap between non-network-based RFID standards (e.g., ISO/IEC CD 15961-3, ISO 18000-6C or ISO 18000-7) and existing high bandwidth network standards such as IEEE 802.11 and IEEE 802.15.4.
The purpose of this standard is to define the air interface for radio tags optimized for use in visibility networks, where presence, identity and associated data can be determined from stationary or moving tagged items, in situ, within relatively arbitrary storage areas. 'In situ' in this context means that it is not necessary to either move the tagged items into closer proximity of a reader nor to move a reader into closer proximity of tagged items in order to identify the presence of a tag or to read or modify tag information. In addition to visibility networks, applications for the radio tags described in this document include sensors, effectors, battery operated displays and zero configuration peer to peer networks. This standard will facilitate compatibility and encourage inter-operability of routers, readers, base stations and radio tags from multiple manufacturers. It is expected that additional standards under the IEEE 1902 identifier will provide other physical link options, command sets and standardization of commands and operations for specific vertical market applications. This standard specifies operation in the 47CFR15.209 emission regulation environment where field strength levels are below the threshold of regulation and thus permits operation world wide without requiring action on the part of regulatory bodies or the acquisition of special site licenses. This standard specifies: - The functions and services required by an IEEE 1902.1 compliant device to operate within ad hoc networks. - The MAC procedures to support the delivery of MAC service data units (MSDU). - PHY signaling techniques and interface functions. - Operation of IEEE 1902.1 compliant devices within a wireless network that may co-exist with multiple other overlapping IEEE 1902.1 networks.

SDO IEEE: Institute of Electrical and Electronics Engineers
Document Number 1902.1
Publication Date March 31, 2009
Language en - English
Page Count 35
Revision Level
Supercedes
Committee Standards Development Board
Publish Date Document Id Type View
March 31, 2009 1902.1-2009 Revision