Logo

IEEE 179-1961

Current Revision

IEEE Standards on Piezoelectric Crystals:Measurements of Piezoelectric Ceramics- 1961

$51.00


Sub Total (1 Item(s))

$ 0.00

Estimated Shipping

$ 0.00

Total (Pre-Tax)

$ 0.00


Stay effortlessly up-to-date with the latest standard revisions. When new versions are released, they're automatically charged and delivered to you, ensuring seamless compliance.

Document Preview Not Available...

- Inactive-Withdrawn.
The resonance method in general is covered in the I R E Standards on Piezoelectric Crystals, 1958 [3]. Procedures are described in the Standards on Piezoelectric Crystals, 1957 [2], and in the literature [ 6 ] - [8], The transmission method is used for determination of fm, the frequency at minimum impedance of the sample. In addition to this measurement, the present Standard also specifies the measurement of the frequency at maximum impedance fn. A simplification of the transmission network in the 1957 Standard (Fig. 4) may be used in view of the range of parameters found in the ceramics. This simplified circuit is shown in Fig. 1. The signal generator should have an output impedance lower than the minimum impedance of the test specimen.

SDO IEEE: Institute of Electrical and Electronics Engineers
Document Number 179
Publication Date April 4, 1961
Language en - English
Page Count 8
Revision Level
Supercedes
Committee
Publish Date Document Id Type View
April 4, 1961 179-1961 Revision