Logo

IEEE 1210-1996

Historical Revision

IEEE Standard Tests for Determining Compatibility of Cable-Pulling Lubricants With Wire and Cable

$141.00


Sub Total (1 Item(s))

$ 0.00

Estimated Shipping

$ 0.00

Total (Pre-Tax)

$ 0.00


Stay effortlessly up-to-date with the latest standard revisions. When new versions are released, they're automatically charged and delivered to you, ensuring seamless compliance.

Document Preview Not Available...

New IEEE Standard - Superseded. Superseded by 1210-2004 Criteria and test methods for determining the compatibility of cable-pulling lubricants (compounds) with cable jacket or other exterior cable covering are described in this standard. Cable-pulling lubricants are used to lower the tension on cable as it is pulled into conduit, duct, or directionally bored holes. Compatibility is important because lubricants should not negatively interact with the cables they lubricate. Compatibility of lubricants with a variety of common cable coverings is considered.
This standard applies to cable lubricants (compounds) and the testing and analysis of their interaction with wire and cable. Cable lubricants are used to lower the tension on cables when they are installed (pulled) into conduits, ducts, or directionally bored holes. These lubricants and/or their residues are in direct contact with the cable exterior covering and may remain so for the life of the cable. Cable lubricants should be compatible with the cable. They should not interfere with the function of any component of the cable system which they contact.
This document will describe standard criteria for testing the interaction of cable pulling compounds (lubricants) with electrical cable jacket or other cable exterior covering. These tests and criteria will be used to determine if the compound is acceptable for use on specific cable types.

SDO IEEE: Institute of Electrical and Electronics Engineers
Document Number 1210
Publication Date Aug. 22, 1996
Language en - English
Page Count 20
Revision Level
Supercedes
Committee Insulated Conductors
Publish Date Document Id Type View
March 23, 2005 1210-2004 Revision
Aug. 22, 1996 1210-1996 Revision