Storage of radioactive waste and irradiated fuel
This is the first edition of CSA N292.4, Storage of radioactive waste and irradiated fuel . This Standard is part of the CSA N292 series of Standards on radioactive waste management. This Standard is a consolidation of and replaces CSA N292.1, Wet storage of irradiated fuel and other radioactive materials, and CSA N292.2, Interim dry storage of irradiated fuel. In addition to the contents of those two Standards, this Standard draws on clauses developed for CSA N292.7, Deep geological disposal of radioactive waste and irradiated fuel, where relevant, to ensure that the entire lifecycle of facilities that include storage of radioactive waste or irradiated fuel is covered in this Standard. This includes, but is not limited to, adding requirements and guidance on engagement, site evaluation, monitoring and surveillance, site preparation, construction, and commissioning. This Standard works in concert with CSA N292.0, General principles for the management of radioactive waste and irradiated fuel, which specifies common requirements for the management of radioactive waste or irradiated fuel. The CSA N-Series Standards provide an interlinked set of requirements for the management of nuclear facilities and activities. CSA N286 provides overall direction to management to develop and implement sound management practices and controls, while the other CSA Group nuclear Standards provide technical requirements and guidance that support the management system. This Standard works in harmony with CSA N286 and does not duplicate the generic requirements of CSA N286; however, it might provide more specific direction for those requirements. This Standard draws on the experience both in Canada and internationally in storage of radioactive waste, irradiated fuel, or other radioactive materials and reflects current best practices. Users of this Standard are reminded that the design, manufacture, construction, commissioning, operation, and decommissioning of nuclear facilities in Canada are subject to the provisions of the Nuclear Safety and Control Act and its supporting Regulations. This Standard was prepared by the Subcommittee on Storage of Radioactive Waste and Irradiated Fuel, under the jurisdiction of the Technical Committee on Radioactive Waste Management and the Strategic Steering Committee on Nuclear Standards, and has been formally approved by the Technical Committee.
Storage facilities and storage areas 1.1.1 Storage of radioactive waste or irradiated fuel This Standard specifies requirements for standalone storage facilities and areas within other facilities dedicated to storage of
The requirements in this Standard also pertain to wet storage of other radioactive materials requiring shielding or decay heat dissipation.
Notes:
This Standard includes requirements for storage of damaged or defective irradiated fuel. Note: For dry storage of damaged or defective fuel, there can be additional processing and packaging requirements that are not detailed in this Standard.
This Standard includes requirements for on-site transfer of radioactive waste, irradiated fuel, or other radioactive materials
This Standard specifies the requirements for the following activities that occur during the lifecycle of a storage facility
Note: Decommissioning of storage facilities and other facilities containing nuclear substances is subject to the requirements in CSA N294
This Standard excludes requirements for
This Standard is used in conjunction with CSA N292.0.
This Standard applies to waste organizations or facilities associated with storage of radioactive waste, irradiated fuel, or other radioactive materials, as defined in Clause 1.1. Note: Waste organizations can refer to waste generators, waste brokers, waste receivers, waste processors, and the operating organizations of waste management facilities.
In this Standard, “shall” is used to express a requirement, i.e., a provision that the user is obliged to satisfy in order to comply with the Standard; “should” is used to express a recommendation or that which is advised but not required; and “may” is used to express an option or that which is permissible within the limits of the Standard. Notes accompanying clauses do not include requirements or alternative requirements; the purpose of a note accompanying a clause is to separate from the text explanatory or informative material. Notes to tables and figures are considered part of the table or figure and may be written as requirements. Annexes are designated normative (mandatory) or informative (non-mandatory) to define their application.
| SDO | CSA: Canadian Standards Association |
| Document Number | |
| Publication Date | Jan. 1, 2023 |
| Language | en - English |
| Page Count | 77 |
| Revision Level | |
| Supercedes | |
| Committee |