Logo

CSA C871:13 (R2024)

Current Reaffirmation

Performance of LED replacement lamps

$155.00


Sub Total (1 Item(s))

$ 0.00

Estimated Shipping

$ 0.00

Total (Pre-Tax)

$ 0.00


Document Preview Not Available...

Performance of LED replacement lamps
Preface This is the first edition of CSA C871, Performance of LED replacement lamps . The requirements in this Standard have been developed in accordance with NEMA SSL-4, SSL Retrofit Lamps: Suggested Minimum Performance Requirements. It is expected that non-mandatory high performance levels will be included in future editions of this Standard as per final ENERGY STAR® specifications. CSA Group acknowledges that the development of this Standard was made possible, in part, by the financial support of Efficiency Nova Scotia, Hydro-Québec, Manitoba Hydro, Natural Resources Canada, the Ontario Ministry of Energy, the Ontario Power Authority, and SaskPower. This Standard is considered suitable for use for conformity assessment within the stated scope of the Standard. This Standard was prepared by the Subcommittee on LED Replacement Lamps, under the jurisdiction of the Technical Committee on Performance of Lighting Equipment and the Strategic Steering Committee on Performance, Energy Efficiency, and Renewables, and has been formally approved by the Technical Committee. This Standard has been developed in compliance with Standards Council of Canada requirements for National Standards of Canada. It has been published as a National Standard of Canada by CSA Group. Scope 1.1 This Standard defines minimum energy efficiency and performance requirements for light emitting diode (LED) lamps with an ANSI or IEC standardized base that are designed to connect to a low-voltage or branch circuit via a lampholder. The criteria in this Standard apply to both integral LED lamps of nonstandard form, and to those intended to replace standard general service incandescent lamps, decorative (candelabra-style) lamps, and reflector lamps. Note: Safety requirements for LED replacement lamps are provided in CAN/CSA-C22.2 No. 250.13. 1.2 In this Standard, "shall" is used to express a requirement, i.e., a provision that the user is obliged to satisfy in order to comply with the standard; "should" is used to express a recommendation or that which is advised but not required; and "may" is used to express an option or that which is permissible within the limits of the standard. Notes accompanying clauses do not include requirements or alternative requirements; the purpose of a note accompanying a clause is to separate from the text explanatory or informative material. Notes to tables and figures are considered part of the table or figure and may be written as requirements. Annexes are designated normative (mandatory) or informative (nonmandatory) to define their application.

SDO CSA: Canadian Standards Association
Document Number
Publication Date April 28, 2024
Language en - English
Page Count
Revision Level
Supercedes
Committee
Publish Date Document Id Type View
April 28, 2024 Reaffirmation
April 28, 2024 Reaffirmation