Thermoplastic Pressure Piping Standards Package - Consists of all the CSA B137:23 standards

Thermoplastic Pressure Piping Standards Package consists of: CSA B137.0:23 - Definitions, general requirements, and methods of testing for thermoplastic pressure piping Preface This is the twelfth edition of CSA B137.0, Definitions, general requirements, and methods of testing for thermoplastic pressure piping. It supersedes the previous editions published in 2020, 2017, 2013, 2009, 2005, 2002, 1999, 1993, 1986, 1981, and 1973. CSA B137.0 provides requirements and test methods that are common to some or all of the Standards of the CSA B137 Series. Wherever possible, individual Standards make reference to the relevant clauses in CSA B137.0. The major changes to this edition include

1. revision to humidity tolerances
2. revision to chemical resistance test
3. revisions to Clause 6.6 for hydrostatic sustained pressure test, including i) additional reference standards and additional details for testing and analysis; ii) new clause 6.6.3.5 for compounds; iii) revision to Clause 6.6.4.1.2 for PE-RT compound validation; and iv) revision to Clause 6.6.4. This Standard is considered suitable for use for conformity assessment within the stated scope of the Standard. This Standard was prepared by the Technical Committee on Plastic Pressure Piping, under the jurisdiction of the Strategic Steering Committee on Construction and Civil Infrastructure, and has been formally approved by the Technical Committee. This Standard has been developed in compliance with Standards Council of Canada requirements for National Standards of Canada. It has been published as a National Standard of Canada by CSA Group. -------------------------------------------------------------------------------------------------------------------------------- CSA B137.1:23 - Polyethylene (PE) pipe, tubing, and fittings for cold-water pressure services Preface This is the twelfth edition of CSA B137.1, Polyethylene (PE) pipe, tubing, and fittings for cold-water pressure services. It supersedes the previous editions published in 2020, 2017, 2013, 2009, 2005, 2002, 1999, 1995, 1989, 1983, and 1970. This Standard is to be used with the 2023 edition of CSA B137.0, which provides requirements and test methods that are common to some or all of the Standards of the CSA B137 series. The following are the major changes to this edition: a) revised the scope for clarification
4. removed PE 1704, PE 2606, PE 3708, PE 3710, PE 4608, and PE 4708 compounds
5. added PE 2708 PLUS compounds
6. added DR-Based pipe classification and design
7. added pipe sizes up to NPS-65 for DR-Based pipe
8. moved carbon black dispersion requirement from Clauses 4 to 5
9. added apparent tensile strength test for pipe sizes above NPS-4
10. added out-of-roundness and ovality requirements
11. added inside surface ductility requirement
12. added pipe sampling and testing requirements
13. added potable water requirement
14. revised the pipe and tubing marking requirements. This Standard is considered suitable for use for conformity assessment within the stated scope of the Standard. This Standard was prepared by the Technical Committee on Plastic Pressure Piping, under the jurisdiction of the Strategic Steering Committee on Construction and Civil Infrastructure, and has been formally approved by the Technical Committee. This Standard has been developed in compliance with Standards Council of Canada requirements for National Standards of Canada. It has been published as a National Standard of Canada by CSA Group. -------------------------------------------------------------------------------------------------------------------------------- CSA B137.2:23 - Polyvinylchloride (PVC) injection-moulded gasketed fittings for pressure applications Preface This is the tenth edition of CSA B137.2, Polyvinylchloride (PVC) injection-moulded gasketed fittings for pressure applications. It supersedes the previous editions published in 2020, 2017, 2013, 2009, 2005, 2002, 1999, 1993, and 1989. This Standard is to be used with the 2023 edition of CSA B137.0, which provides requirements and test methods that are common to some or all of the Standards of the CSA B137 series. The major changes to this edition include a) updated figures in Table 2
15. updated ozone resistance test conditions and requirements in Table 3. This Standard is considered suitable for use for conformity assessment within the stated scope of the Standard. This Standard was prepared by the Technical Committee on Plastic Pressure Piping, under the jurisdiction of the Strategic Steering Committee on Construction and Civil Infrastructure, and has been formally approved by the Technical Committee. This Standard has been developed in compliance with Standards Council of Canada requirements for National Standards of Canada. It has been published as a National Standard of Canada by CSA Group. -------------------------------------------------------------------------------------------------------------------------------- CSA B137.3:23 - Rigid polyvinylchloride (PVC) pipe and fittings for pressure applications Preface This is the fourteenth edition of CSA B137.3, Rigid polyvinylchloride (PVC) pipe and fittings for pressure applications. It supersedes the previous editions published in 2020, 2017, 2013, 2009, 2005, 2002, 1999, 1993, 1990, 1986, 1981, 1972, and 1970. This Standard is to be used with the 2023 edition of CSA B137.0, which provides requirements and test methods that are common to some or all of the Standards of the CSA B137 series. The major change to this edition is an update to the ozone resistance test conditions and requirements in Table 14. This Standard is considered suitable for use for conformity assessment within the stated scope of the Standard. This Standard was prepared by the Technical Committee on Plastic Pressure Piping, under the jurisdiction of the Strategic Steering Committee on Construction and Civil Infrastructure, and has been formally approved by the Technical Committee. This Standard has been developed in compliance with Standards Council of Canada requirements for National Standards of Canada. It has been published as a National Standard of Canada by CSA Group. -------------------------------------------------------------------------------------------------------------------------------- CSA B137.3.1:23 - Molecularly oriented polyvinylchloride (PVCO) pipe for pressure applications Preface This is the fifth edition of CSA B137.3.1, Molecularly oriented polyvinylchloride (PVCO) pipe for pressure applications. It supersedes the previous editions published in 2020, 2017, 2013, and 2009. This Standard is to be used with the 2023 edition of CSA B137.0, which provides requirements and test methods that are common to some or all of the Standards of the CSA B137 series. The major changes to this edition are updates to the ozone resistance test conditions and requirements in Table 8 and the markings in Clause 7. This Standard is considered suitable for use for conformity assessment within the stated scope of the Standard. This Standard was prepared by the Technical Committee on Plastic Pressure Piping, under the jurisdiction of the Strategic Steering Committee on Construction and Civil Infrastructure, and has been formally approved by the Technical Committee. This Standard has been developed in compliance with Standards Council of Canada requirements for National Standards of Canada. It has been published as a National Standard of Canada by CSA Group. -------------------------------------------------------------------------------------------------------------------------------- CSA B137.4:23 - Polyethylene (PE) piping systems for gas services Preface This is the twelfth edition of CSA B137.4, Polyethylene (PE) piping systems for gas services. It supersedes the previous editions published in 2020, 2017, 2013, 2009, 2005, 2002, 1999, 1992, 1986, 1977, and 1971. This Standard is to be used with the 2023 edition of CSA B137.0, which provides requirements and test methods that are common to some or all of the Standards of the CSA B137 series. The following are the major changes to this edition: a) added recommendations for PE material used for heat fusion fittings
16. added CRS at a specified temperature
17. revised the chemical resistance test
18. revised the inside surface ductility test
19. added the oxidative induction time (OIT) test
20. added the 90 °C elevated temperature pressure test
21. revised humidity tolerances
22. revised marking requirements. This Standard is considered suitable for use for conformity assessment within the stated scope of the Standard. This Standard was prepared by the Technical Committee on Plastic Pressure Piping, under the jurisdiction of the Strategic Steering Committee on Construction and Civil Infrastructure, and has been formally approved by the Technical Committee. This Standard has been developed in compliance with Standards Council of Canada requirements for National Standards of Canada. It has been published as a National Standard of Canada by CSA Group. -------------------------------------------------------------------------------------------------------------------------------- CSA B137.4.1:23 - Electrofusion-type polyethylene (PE) fittings for gas services Preface This is the ninth edition of CSA B137.4.1, Electrofusion-type polyethylene (PE) fittings for gas services, which supersedes the previous editions published in 2020, 2017, 2013, 2009, 2005, 2002, 1999, and 1989. This Standard is to be used with the 2023 edition of CSA B137.0, which provides requirements and test methods that are common to some or all of the Standards of the CSA B137 series. The major change in this edition is updating the reference of CSA B137.0 to the 2023 edition. This Standard is considered suitable for use for conformity assessment within the stated scope of the Standard. This Standard was prepared by the Technical Committee on Plastic Pressure Piping, under the jurisdiction of the Strategic Steering Committee on Construction and Civil Infrastructure, and has been formally approved by the Technical Committee. This Standard has been developed in compliance with Standards Council of Canada requirements for National Standards of Canada. It has been published as a National Standard of Canada by CSA Group. -------------------------------------------------------------------------------------------------------------------------------- CSA B137.5:23 - Crosslinked polyethylene (PEX) tubing systems for pressure applications Preface This is the eleventh edition of CSA B137.5, Crosslinked polyethylene (PEX) tubing systems for pressure applications. It supersedes the previous editions published in 2020, 2017, 2013, 2009, 2005, 2002, 1999, 1997, 1996, and 1989. This Standard is to be used with the 2023 edition of CSA B137.0, which provides requirements and test methods that are common to some or all of the Standards of the CSA B137 series. The major changes to this edition include a) addition of Clause 4.2.1.1 and revised Clause 5.6 for crosslinking methodologies
23. revision to push-fit fitting requirements
24. revision to environmental stress cracking test. This Standard is considered suitable for use for conformity assessment within the stated scope of the Standard. This Standard was prepared by the Technical Committee on Plastic Pressure Piping, under the jurisdiction of the Strategic Steering Committee on Construction and Civil Infrastructure, and has been formally approved by the Technical Committee. This Standard has been developed in compliance with Standard Council of Canada requirements for National Standards of Canada. It has been published as a National Standard of Canada by CSA Group. -------------------------------------------------------------------------------------------------------------------------------- CSA B137.6:23 - Chlorinated polyvinylchloride (CPVC) pipe, tubing, and fittings for hot-and cold-water distribution systems Preface This is the eleventh edition of CSA B137.6, Chlorinated polyvinylchloride (CPVC) pipe, tubing, and fittings for hot- and cold-water distribution systems. It supersedes the previous editions published in 2020, 2017, 2013, 2009, 2005, 2002, 1999, 1996, 1983, and 1971. This Standard is to be used with the 2023 edition of CSA B137.0, which provides requirements and test methods that are common to some or all of the Standards of the CSA B137 series. The major changes to this edition include a) addition of Clause 5.4.2.3 for THF content
25. revision to specimen filling requirements for hydrostatic pressure test
26. revision to pipe and tubing marking requirements
27. revision to Table 2 for smaller pipe sizes
28. revision to Clause A.6.2.1 for pressure testing. This Standard is considered suitable for use for conformity assessment within the stated scope of the Standard. This Standard was prepared by the Technical Committee on Plastic Pressure Piping, under the jurisdiction of the Strategic Steering Committee on Construction and Civil Infrastructure, and has been formally approved by the Technical Committee. This Standard has been developed in compliance with Standards Council of Canada requirements for National Standards of Canada. It has been published as a National Standard of Canada by CSA Group. -------------------------------------------------------------------------------------------------------------------------------- CSA B137.9:23 - Polyethylene/aluminum/polyethylene (PE-AL-PE) composite pressure-pipe systems Preface This is the tenth edition of CSA B137.9, Polyethylene/aluminum/polyethylene (PE-AL-PE) composite pressure-pipe systems, which supersedes the previous editions published in 2020, 2017, 2013, 2009, 2005, 2002, 1999, 1998, and 1991. This Standard is to be used with the 2023 edition of CSA B137.0, which provides requirements and test methods that are common to some or all of the Standards of the CSA B137 series. The major change in this new edition is the update to clause references for the carbon black requirement. This Standard is considered suitable for use for conformity assessment within the stated scope of the Standard. This Standard was prepared by the Technical Committee on Plastic Pressure Piping, under the jurisdiction of the Strategic Steering Committee on Construction and Civil Infrastructure, and has been formally approved by the Technical Committee. This Standard has been developed in compliance with Standards Council of Canada requirements for National Standards of Canada. It has been published as a National Standard of Canada by CSA Group. -------------------------------------------------------------------------------------------------------------------------------- CSA B137.10:23 - Crosslinked polyethylene/aluminum/crosslinked polyethylene (PEX-AL-PEX) composite pressure-pipe systems Preface This is the tenth edition of CSA B137.10, Crosslinked polyethylene/aluminum/crosslinked polyethylene (PEX-AL-PEX) composite pressure-pipe systems, which supersedes the previous editions published in 2020, 2017, 2013, 2009, 2005, 2002, 1999, 1998, and 1991. This Standard is to be used with the 2023 edition of CSA B137.0, which provides requirements and test methods that are common to some or all of the Standards of the CSA B137 series. The major changes to this edition include a) updated clause references for carbon black requirement
29. revision to excessive temperature and pressure capability test
30. revision to hydrostatic burst test. This Standard is considered suitable for use for conformity assessment within the stated scope of the Standard. This Standard was prepared by the Technical Committee on Plastic Pressure Piping, under the jurisdiction of the Strategic Steering Committee on Construction and Civil Infrastructure, and has been formally approved by the Technical Committee. This Standard has been developed in compliance with Standards Council of Canada requirements for National Standards of Canada. It has been published as a National Standard of Canada by CSA Group. -------------------------------------------------------------------------------------------------------------------------------- CSA B137.11:23 - Polypropylene (PP-R & PP-RCT) pipe and fittings for pressure applications Preface This is the ninth edition of CSA B137.11, Polypropylene (PP-R and PP-RCT) pipe and fittings for pressure applications. It supersedes the previous editions published in 2020, 2017, 2013, 2009, 2005, 2002, 1999, and 1993. This Standard is to be used with the 2023 edition of CSA B137.0, which provides requirements and test methods that are common to some or all of the Standards of the CSA B137 series. The major changes in this new edition include a) updated references to ISO 15874 standards
31. revision to hydrostatic sustained pressure test
32. addition of nominal pipe sizes 5 and 11
33. revision to the figure in Table 5. This Standard is considered suitable for use for conformity assessment within the stated scope of the Standard. This Standard was prepared by the Technical Committee on Plastic Pressure Piping, under the jurisdiction of the Strategic Steering Committee on Construction and Civil Infrastructure, and has been formally approved by the Technical Committee. This Standard has been developed in compliance with Standards Council of Canada requirements for National Standards of Canada. It has been published as a National Standard of Canada by CSA Group. -------------------------------------------------------------------------------------------------------------------------------- CSA B137.12:23 - Polyamide (PA) piping systems for gas services Preface This is the ninth edition of CSA B137.12, Polyamide (PA) piping systems for gas services. It supersedes the previous editions published in 2020 and 2017, and the editions 2013, 2009, 2005, 2002, 1999, and 1996. This Standard is to be used with the 2023 edition of CSA B137.0, which provides requirements and test methods that are common to some or all of the Standards of the CSA B137 series. The major changes in this edition include a) revision to humidity tolerances
34. revision to marking requirements
35. addition of Clause 7.3 for tracking and traceability. This Standard is considered suitable for use for conformity assessment within the stated scope of the Standard. This Standard was prepared by the Technical Committee on Plastic Pressure Piping, under the jurisdiction of the Strategic Steering Committee on Construction and Civil Infrastructure, and has been formally approved by the Technical Committee. This Standard has been developed in compliance with Standards Council of Canada requirements for National Standards of Canada. It has been published as a National Standard of Canada by CSA Group. -------------------------------------------------------------------------------------------------------------------------------- CSA B137.18:23 - Polyethylene of raised temperature resistance (PE-RT) tubing systems for pressure applications Preface This is the fourth edition of CSA B137.18, Polyethylene of raised temperature resistance (PE-RT) tubing systems for pressure applications. It supersedes the previous editions published in 2020, 2017, and 2013. This Standard is to be used with the 2023 edition of CSA B137.0, which provides requirements and test methods that are common to some or all of the Standards of the CSA B137 series. The major changes in this edition include a) addition of oxygen barrier layer requirements
36. revision to environmental stress crack test
37. revision to hydrostatic sustained pressure test
38. revision to tubing marking requirements. This Standard is considered suitable for use for conformity assessment within the stated scope of the Standard. This Standard was prepared by the Technical Committee on Plastic Pressure Piping, under the jurisdiction of the Strategic Steering Committee on Construction and Civil Infrastructure, and has been formally approved by the Technical Committee. This Standard has been developed in compliance with Standards Council of Canada requirements for National Standards of Canada. It has been published as a National Standard of Canada by CSA Group. -------------------------------------------------------------------------------------------------------------------------------- CSA B139.19:23 - Crosslinked polyethylene (PEX) piping systems for gas services Preface This is the third edition of CSA B137.19, Crosslinked polyethylene (PEX) piping systems for gas services. It supersedes the previous editions published in 2020 and 2017. This Standard is to be used with the 2023 edition of CSA B137.0, which provides requirements and test methods that are common to some or all of the Standards of the CSA B137 series. The major changes in this edition include a) addition of joints to scope
39. revision to scope for fittings
40. addition of Clause 4.1.1.2.2 for design stress
41. addition of Clause 4.1.1.4 for operating temperature range
42. revision to UV protection
43. revision to density requirement
44. clarification of fitting suitability
45. addition of Clause 4.3.4.2.2 for joints with ASTM F3373 fittings
46. addition of Clause 4.3.4.2.3 for PE electrofusion fitting markings
47. revision to humidity tolerances
48. revision to sustained pressure test temperature
49. revision to marking requirements
50. revision to Table 7
51. and addition of Tables 8 and 9.

This Standard is considered suitable for use for conformity assessment within the stated scope of the Standard. This Standard was prepared by the Technical Committee on Plastic Pressure Piping, under the jurisdiction of the Strategic Steering Committee on Construction and Civil Infrastructure, and has been formally approved by the Technical Committee. This Standard has been developed in compliance with Standards Council of Canada requirements for National Standards of Canada. It has been published as a National Standard of Canada by CSA Group