BSI |
BS EN 12636 |
Products and systems for the protection and repair of concrete structures. Test methods. Determination of adhesion concrete to concrete |
|
BSI |
BS EN 12189 |
Products and systems for the protection and repair of concrete structures. Test methods. Determination of open time |
|
BSI |
BS EN 13295 |
Products and systems for the protection and repair of concrete structures.Test methods. Determination of resistance to carbonation |
|
BSI |
BS EN 13584 |
Products and systems for the protection and repair of concrete structures. Test methods. Determination of creep in compression for repair products |
|
BSI |
BS EN 13294 |
Products and systems for the protection and repair of concrete structures. Test methods. Determination of stiffening time |
|
BSI |
BS EN 14497 |
Products and systems for the protection and repair of concrete structures. Test methods. Determination of the filtration stability |
|
BSI |
BS EN 12617-4 |
Products and systems for the protection and repair of concrete structures. Test methods. Determination of shrinkage and expansion |
|
BSI |
BS EN 14406 |
Products and systems for the protection and repair of concrete structures. Test methods. Determination of the expansion ratio and expansion evolution |
|
BSI |
BS EN 13395-3 |
Products and systems for the protection and repair of concrete structures. Test methods. Determination of workability. Test for flow of repair concrete |
|
BSI |
BS EN 12615 |
Products and systems for the protection and repair of concrete structures. Test methods. Determination of slant shear strength |
|
BSI |
BS EN 15183 |
Products and systems for the protection and repair of concrete structures. Test methods. Corrosion protection test |
|
BSI |
BS EN 12188 |
Products and systems for the protection and repair of concrete structures. Test methods. Determination of adhesion steel-to-steel for characterization of structural bonding agents |
|
BSI |
BS EN 1770 |
Products and systems for the protection and repair of concrete structures. Test methods. Determination of the coefficient of thermal expansion |
|
BSI |
BS EN 1771 |
Products and systems for the protection and repair of concrete structures. Test methods. Determination of injectability and splitting test |
|
BSI |
BS EN 12190 |
Products and systems for the protection and repair of concrete structures. Test methods. Determination of compressive strength of repair mortar |
|
BSI |
BS EN 13057 |
Products and systems for the protection and repair of concrete structures. Test methods. Determination of resistance of capillary absorption |
|
BSI |
BS EN 15184 |
Products and systems for the protection and repair of concrete structures. Test methods. Shear adhesion of coated steel to concrete (pull-out test) |
|
BSI |
BS EN 13529 |
Products and systems for the protection and repair of concrete structures. Test methods. Determination of resistance to severe chemical attack |
|
BSI |
BS EN 13062 |
Products and systems for the protection and repair of concrete structures. Test method. Determination of thixotropy of products for protection of reinforcement |
|
BSI |
BS EN 13412 |
Products and systems for the protection and repair of concrete structures. Test methods. Determination of modulus of elasticity in compression |
|
BSI |
BS EN 13687-4 |
Products and systems for the protection and repair of concrete structures. Test methods. Determination of thermal compatibility. Dry thermal cycling |
|
BSI |
BS EN 14629 |
Products and systems for the protection and repair of concrete structures. Test methods. Determination of chloride content in hardened concrete |
|
BSI |
BS EN 13733 |
Products and systems for the protection and repair of concrete structures. Test methods. Determination of the durability of structural bonding agents |
|
BSI |
BS EN 1766 |
Products and systems for the protection and repair of concrete structures. Test methods. Reference concretes for testing |
|
BSI |
BS EN 12614 |
Products and systems for the protection and repair of concrete structures. Test methods. Determination of glass transition temperatures of polymers |
|
BSI |
BS EN 14117 |
Products and systems for the protection and repair of concrete structures. Test methods. Determination of time of efflux of cementitious injection products |
|
BSI |
BS EN 12618-3 |
Products and systems for the protection and repair of concrete structures. Test methods. Determination of the adhesion of injection products, with or without thermal cycling. Slant shear method |
|
BSI |
BS EN 13395-2 |
Products and systems for the protection and repair of concrete structures. Test methods. Determination of workability. Test for flow of grout or mortar |
|
BSI |
BS EN 13687-5 |
Products and systems for the protection and repair of concrete structures. Test methods. Determination of thermal compatibility. Resistance to temperature shock |
|
BSI |
BS EN 1543 |
Products and systems for the protection and repair of concrete structures. Test methods. Determination of tensile strength development for polymers |
|
BSI |
BS EN 1767 |
Products and systems for the protection and repair of concrete structures. Test methods. Infrared analysis |
|
BSI |
BS EN 1877-1 |
Products and systems for the protection and repair of concrete structures. Test methods. Reactive functions related to epoxy resins. Determination of epoxy equivalent |
|
BSI |
BS EN 13395-4 |
Products and systems for the protection and repair of concrete structures. Test methods. Determination of workability. Application of repair mortar overhead |
|
BSI |
BS EN 13395-1 |
Products and systems for the protection and repair of concrete structures. Test methods. Determination of workability. Test for flow of thixotropic mortars |
|
BSI |
BS EN 12618-2 |
Products and systems for the protection and repair of concrete structures. Test methods. Determination of the adhesion of injection products, with or without thermal cycling. Adhesion by tensile bond strength |
|
BSI |
BS EN 13578 |
Products and systems for the protection and repair of concrete structures. Test method. Compatibility on wet concrete |
|
BSI |
BS EN 12617-1 |
Products and systems for the protection and repair of concrete structures. Test methods. Determination of linear shrinkage for polymers and surface protection systems (SPS) |
|
BSI |
BS EN 13894-1 |
Products and systems for the protection and repair of concrete structures. Test methods. Determination of fatigue under dynamic loading. During cure |
|
BSI |
BS EN 12637-1 |
Products and systems for the protection and repair of concrete structures. Test methods. Compatibility of injection products. Compatibility with concrete |
|
BSI |
BS EN 13687-2 |
Products and systems for the protection and repair of concrete structures. Test methods. Determination of thermal compatibility. Thunder-shower cycling (thermal shock) |
|
BSI |
BS EN 12617-3 |
Products and systems for the protection and repair of concrete structures. Test methods. Determination of early age linear shrinkage for structural bonding agents |
|
BSI |
BS EN 1881 |
Products and systems for the protection and repair of concrete structures. Test methods. Testing of anchoring products by the pull-out method |
|
BSI |
BS EN 13579 |
Products and systems for the protection and repair of concrete structures. Test methods. Drying test for hydrophobic impregnation |
|
BSI |
BS EN 13894-2 |
Products and systems for the protection and repair of concrete structures. Test methods. Determination of fatigue under dynamic loading. After hardening |
|
BSI |
BS EN 14630 |
Products and systems for the protection and repair of concrete structures. Test methods. Determination of carbonation depth in hardened concrete by the phenolphthalein method |
|
BSI |
DD ENV 1504-9 |
Products and Systems for the Protection and Repair of Concrete Structures, Definitions, Re |
|
BSI |
BS EN 12618-1 |
Products and systems for the protection and repair of concrete structures. Test methods. Adhesion and elongation capacity of injection products with limited ductility |
|
BSI |
BS EN 13396 |
Products and systems for the protection and repair of concrete structures. Test methods. Measurement of chloride ion ingress |
|
BSI |
BS EN 1542 |
Products and systems for the protection and repair of concrete structures. Test methods. Measurement of bond strength by pull-off |
|
BSI |
BS EN 13687-3 |
Products and systems for the protection and repair of concrete structures. Test methods. Determination of thermal compatibility. Thermal cycling without de-icing salt impact |
|
BSI |
BS EN 14068 |
Products and systems for the protection and repair of concrete structures. Test methods. Determination of watertightness of injected cracks without movement in concrete |
|
BSI |
BS EN 12637-3 |
Products and systems for the protection and repair of concrete structures. Test methods. Compatibility of injection products. Effect of injection products on elastomers |
|
BSI |
BS EN 13687-1 |
Products and systems for the protection and repair of concrete structures. Test methods. Determination of thermal compatibility. Freeze-thaw cycling with de-icing salt immersion |
|
BSI |
BS EN 13581 |
Products and systems for the protection and repair of concrete structures. Test methods. Determination of loss of mass of hydrophobic impregnated concrete after freeze-thaw salt stress |
|
BSI |
BS EN 1877-2 |
Products and systems for the protection and repair of concrete structures. Test methods. Reactive functions related to epoxy resins. Determination of amine functions using the total basicity number |
|
BSI |
BS EN 13580 |
Products and systems for the protection and repair of concrete structures. Test methods. Water absorption and resistance to alkali for hydrophobic impregnations |
|
BSI |
BS EN 1799 |
Products and systems for the protection and repair of concrete structures. Test methods. Tests to measure the suitability of structural bonding agents for application to concrete surface |
|
BSI |
BS EN 1544 |
Products and systems for the protection and repair of concrete structures. Test methods. Determination of creep under sustained tensile load for synthetic resin products (PC) for anchoring of reinforcing bars |
|
BSI |
BS EN 12192-1 |
Products and systems for the protection and repair of concrete structures. Granulometry analysis. Test method for dry components of premixed mortar |
|
BSI |
BS EN 14498 |
Products and systems for the protection and repair of concrete structures. Test methods. Volume and weight changes of injection products after air drying and water storage cycles |
|
BSI |
BS EN 12617-2 |
Products and systems for the protection and repair of concrete structures. Test methods. Shrinkage of crack injection products based on polymer binder: volumetric shrinkage |
|
BSI |
BS EN 12192-2 |
Products and systems for the protection and repair of concrete structures. Granulometry analysis. Test method for fillers for polymer bonding agents |
|
BSI |
BS EN 1504-1 |
Products and systems for the protection and repair of concrete structures. Definitions, requirements, quality control and evaluation of conformity. Definitions |
|
BSI |
BS EN 1504-8 |
Products and systems for the protection and repair of concrete structures. Definitions, requirements, quality control and evaluation of conformity. Quality control and evaluation of conformity |
|