BSI |
BS 6043-4.11 |
Methods of sampling and test for carbonaceous materials used in aluminium manufacture. Cold ramming pastes. Determination of the thermal expansion of baked rammed paste |
|
BSI |
BS 6043-4.12 |
Methods of sampling and test for carbonaceous materials used in aluminium manufacture. Cold ramming pastes. Determination of the thermal conductivity of baked rammed paste |
|
BSI |
BS 6043-4.13 |
Methods of sampling and test for carbonaceous materials used in aluminium manufacture. Cold ramming pastes. Determination of ash of baked rammed paste |
|
BSI |
BS 6043-4.9 |
Methods of sampling and test for carbonaceous materials used in aluminium manufacture. Cold ramming pastes. Determination of the cold crushing strength of baked rammed paste |
|
BSI |
BS 6043-4.10 |
Methods of sampling and test for carbonaceous materials used in aluminium manufacture. Cold ramming pastes. Determination of the apparent porosity of baked rammed paste |
|
BSI |
BS 6043-4.8 |
Methods of sampling and test for carbonaceous materials used in aluminium manufacture. Cold ramming pastes. Determination of electrical resistivity of baked rammed paste |
|
BSI |
BS 6043-4.5 |
Methods of sampling and test for carbonaceous materials used in aluminium manufacture. Cold ramming pastes. Determination of water content of unbaked pastes |
|
BSI |
BS 6043-4.6 |
Methods of sampling and test for carbonaceous materials used in aluminium manufacture. Cold ramming pastes. Determination of maximum rammed apparent density of unbaked paste |
|
BSI |
BS 6043-4.1 |
Methods of sampling and test for carbonaceous materials used in aluminium manufacture. Cold ramming pastes |
|
BSI |
BS 6043-4.4 |
Methods of sampling and test for carbonaceous materials used in aluminium manufacture. Cold ramming pastes. Determination of the volatile matter content of unbaked paste. Section 4.4 Determination of the volatile matter content of unbaked paste |
|
BSI |
BS 6043-4.0 |
Methods of sampling and test for carbonaceous materials used in aluminium manufacture. Cold ramming pastes. General introduction |
|
BSI |
BS 6043-4.7 |
Methods of sampling and test for carbonaceous materials used in aluminium manufacture. Cold ramming pastes. Preparation of baked rammed test pieces and determination of baked apparent density, change in volume and loss in mass |
|
BSI |
BS 6043-4.3 |
Methods of sampling and test for carbonaceous materials used in aluminium manufacture. Cold ramming pastes. Determination of aggregate size distribution after extraction by dichloromethane |
|
BSI |
BS 6043-1.8 |
Methods of sampling and test for carbonaceous materials used in aluminium manufacture. Electrode pitch. Determination of ash |
|
BSI |
BS 6043-3.2 |
Methods of sampling and test for carbonaceous materials used in aluminium manufacture. Electrodes. Determination of density of cathode blocks and prebaked anodes |
|
BSI |
BS 6043-1.6 |
Methods of sampling and test for carbonaceous materials used in aluminium manufacture. Electrode pitch. Determination of coking value |
|
BSI |
BS 6043 |
Methods of Sampling and Test for Carbonaceous Materials Used in Aluminium Manufacture |
|
BSI |
BS 6043-1.11 |
Methods of sampling and test for carbonaceous materials used in aluminium manufacture |
|
BSI |
BS 6043-2.6 |
Methods of sampling and test for carbonaceous materials used in aluminium manufacture. Electrode coke. Determination of the density in xylene of calcined cokes |
|
BSI |
BS 6043-1.3 |
Methods of sampling and test for carbonaceous materials used in aluminium manufacture. Electrode pitch. Determination of softening point (ring and ball method) |
|
BSI |
BS 6043-2.16 |
Methods of sampling and test for carbonaceous materials used in aluminium manufacture. Electrode coke. Determination of water content of calcined coke |
|
BSI |
BS 6043-1.9 |
Methods of sampling and test for carbonaceous materials used in aluminium manufacture. Electrode pitch. Determination of sulphur content (bomb method) |
|
ISO |
ISO 14422 |
Carbonaceous materials used in the production of aluminium -- Cold-ramming pastes -- Methods of sampling |
|
BSI |
BS 6043-2.11 |
Methods of sampling and test for carbonaceous materials used in aluminium manufacture. Electrode coke. Determination of volatile matter content |
|
BSI |
BS 6043-3.3 |
Methods of sampling and test for carbonaceous materials used in aluminium manufacture. Electrodes |
|
BSI |
BS 6043-3.4 |
Methods of sampling and test for carbonaceous materials used in aluminium manufacture. Electrodes |
|
BSI |
BS 6043-3.6 |
Methods of sampling and test for carbonaceous materials used in aluminium manufacture. Electrodes |
|
BSI |
BS 6043-1.10 |
Methods of sampling and test for carbonaceous materials used in aluminium manufacture. Electrode pitch. Determination of volatile matter content |
|
BSI |
BS 6043-1.4 |
Methods of sampling and test for carbonaceous materials used in aluminium manufacture. Electrode pitch. Determination of content of toluene-insoluble material |
|
BSI |
BS 6043-1.12 |
Method of sampling and test for carbonaceous materials used in aluminium manufacture. Electrode pitch. Determination of mesophase content |
|
BSI |
BS 6043-1.2 |
Methods of sampling and test for carbonaceous materials used in aluminium manufacture. Electrode pitch. Determination of water content (Dean and Stark method) |
|
BSI |
BS 6043-2.9 |
Methods of sampling and test for carbonaceous materials used in aluminium manufacture. Electrode coke |
|
BSI |
BS 6043-2.4 |
Methods of sampling and test for carbonaceous materials used in aluminium manufacture. Electrode coke |
|
BSI |
BS 6043-1.7 |
Methods of sampling and test for carbonaceous materials used in aluminium manufacture. Electrode pitch. Determination of apparent density (buoyancy method) |
|
BSI |
BS 6043-2.12 |
Methods of sampling and test for carbonaceous materials used in aluminium manufacture. Electrode coke. Determination of particle size distribution of fine coke |
|
BSI |
BS 6043-2.1 |
Methods of sampling and test for carbonaceous materials used in aluminium manufacture. Electrode coke. Sampling |
|
BSI |
BS 6043-4.2 |
Methods of sampling and test for carbonaceous materials used in aluminium manufacture. Cold ramming pastes. Determination of the effective binder content and aggregate content by extraction with quinoline; determination of aggregate size distribution. Section 4.2 Determination of effective binder content and aggregate content by extraction with quinoline; determination of aggregate size distribution |
|
BSI |
BS 6043-1.5 |
Methods of sampling and test for carbonaceous materials used in aluminium manufacture. Electrode pitch. Determination of content of quinoline-insoluble material |
|
BSI |
BS 6043-2.10 |
Methods of sampling and test for carbonaceous materials used in aluminium manufacture. Electrode coke. Determination of electrical resistivity of calcined coke granules |
|
BSI |
BS 6043-2.13 |
Methods of sampling and test for carbonaceous materials used in aluminium manufacture. Electrode coke. Determination of tapped bulk density of green and calcined coke |
|
BSI |
BS 6043-1.13 |
Methods of sampling and test for carbonaceous materials used in aluminium manufacture. Electrode pitch |
|
BSI |
BS 6043-1.1 |
Methods of sampling and test for carbonaceous materials used in aluminium manufacture. Electrode pitch. Sampling |
|
BSI |
BS 6043-2.8 |
Methods of sampling and test for carbonaceous materials used in aluminium manufacture. Electrode coke. Determination of oil content by solvent extraction of calcined coke |
|
BSI |
BS 6043-2.7 |
Methods of sampling and test for carbonaceous materials used in aluminium manufacture. Electrode coke. Determination of the apparent oil content of calcined cokes (gravimetric method) |
|
BSI |
BS ISO 17544 |
Carbonaceous materials used in the production of aluminium. Cold and tepid ramming pastes. Determination of rammability of unbaked pastes |
|
BSI |
BS ISO 20202 |
Carbonaceous materials used in the production of aluminium. Cold and tepid ramming pastes. Preparation of baked test pieces and determination of loss on baking |
|
ISO |
ISO 20202 |
Carbonaceous materials used in the production of aluminium - Cold and tepid ramming pastes - Preparation of baked test pieces and determination of loss on baking |
|
ISO |
ISO 14428 |
Carbonaceous materials for the production of aluminium - Cold and tepid ramming pastes - Expansion/shrinkage during baking |
|
BSI |
BS ISO 14428 |
Carbonaceous materials for the production of aluminium. Cold and tepid ramming pastes. Expansion/shrinkage during baking |
|
BSI |
BS ISO 12987 |
Carbonaceous materials for the production of aluminium. Anodes, cathodes blocks, sidewall blocks and baked ramming pastes. Determination of the thermal conductivity using a comparative method |
|
ISO |
ISO 12987 |
Carbonaceous materials for the production of aluminium - Anodes, cathodes blocks, sidewall blocks and baked ramming pastes - Determination of the thermal conductivity using a comparative method |
|
BSI |
BS 6043-2.15 |
Methods of sampling and test for carbonaceous materials used in aluminium manufacture. Electrode coke. Determination of grain stability of calcined coke using a laboratory vibration mill |
|