Logo

ASTM F593-02

Historical Revision

Standard Specification for Stainless Steel Bolts, Hex Cap Screws, and Studs

$83.00

$83.00

$149.40


Sub Total (1 Item(s))

$ 0.00

Estimated Shipping

$ 0.00

Total (Pre-Tax)

$ 0.00


Stay effortlessly up-to-date with the latest standard revisions. When new versions are released, they're automatically charged and delivered to you, ensuring seamless compliance.

Document Preview Not Available...

1.1 This specification covers the requirements for stainless steel bolts, hex cap screws, and studs 0.25 to 1.50 in., .inclusive, in nominal diameter in a number of alloys in common use and intended for service applications requiring general corrosion resistance.

1.2 Seven groups of stainless steel alloys are covered, including twelve austenitic, two ferritic, four martensitic, and one precipitation hardening.

Group AlloysCondition
1304, 305, 384, 304 L, (CW) cold worked
18-19LW, 302HQ
2316, 316 L(CW) cold worked
3321, 347(CW) cold worked
4430 (CW) cold worked
5410 (H) hardened and tempered
6431(H) hardened and tempered
7630(AH) age hardened

AUnless otherwise specified on the inquiry and order, the choice of an alloy from within a group shall be at the discretion of the fastener manufacturer (see 6.1).
B See 4.2 for options.
CSizes 0.75 in. and larger may be hot worked and solution annealed.
DWhen approved by the purchaser, Alloys 303, 303Se, or XM1 may be furnished.
EWhen approved by the purchaser, Alloy 430F may be furnished.
FWhen approved by the purchaser, Alloys 416 or 416Se may be furnished.

1.3 Supplementary requirements of an optional nature are provided, applicable only when agreed upon between the manufacturer and the purchaser at the time of the inquiry and order.

1.4 Suitable nuts for use with bolts, hex cap screws, and studs included in this specification are covered by Specification F 594. Unless otherwise specified, all nuts used on these fasteners shall conform to the requirements of Specification F 594, shall be of the same alloy group, and shall have a specified minimum proof stress equal to or greater than the specified minimum full-size tensile strength of the externally threaded fastener.


SDO ASTM: ASTM International
Document Number F593
Publication Date April 10, 2002
Language en - English
Page Count 8
Revision Level 02
Supercedes
Committee F16.04
Publish Date Document Id Type View
Sept. 1, 2024 F0593-24 Revision
Nov. 1, 2022 F0593-22 Revision
June 1, 2017 F0593-17 Revision
Dec. 1, 2013 F0593-13AE01 Revision
Dec. 1, 2013 F0593-13A Revision
April 1, 2013 F0593-13 Revision
May 1, 2008 F0593-02R08E01 Revision
April 10, 2002 F0593-98 Revision
April 10, 2002 F0593-02E02 Revision
April 10, 2002 F0593-02E01 Revision
April 10, 2002 F0593-02 Revision
April 10, 2002 F0593-01 Revision
May 1, 2008 F0593-02R08 Reaffirmation