1.1 This specification establishes nationally recognized performance requirements for portable gasoline, kerosene, and diesel fueling systems intended for reuse by the consumer in filling, transport, dispensing, and storage. This specification does not cover single-trip prepackaged containers.
1.2 This specification defines performance requirements for systems that can effectively reduce fuel spillage and emissions when used in accordance with the manufacturer's (marked) warnings, operating instructions, and limitations of use. This specification does not provide assurance that systems meeting the requirements are suited to all fueling applications and conditions.
1.3 This specification is not a fire hazard standard. It concerns portable gasoline and kerosene containers for consumer use.
1.4 Containers used with these systems shall meet all applicable requirements of either Specification F 852
1.5 The following precautionary caveat applies only to the test method portion, Section 5, of this specification: This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
This specification establishes nationally recognized performance requirements for portable gasoline, kerosene, and diesel fueling systems intended for reuse by the consumer in filling, transport, dispensing, and storage. This specification defines performance requirements for systems that can effectively reduce fuel spillage and emissions when used in accordance with the manufacturer's (marked) warnings, operating instructions, and limitations of use. Permeability, flow rate, and fill level shall conform to the requirements specified. Spout samples shall be subjected to the following tests in order to determine their overall performance: leakage test, operation test, elevated temperature test, bending moment test, cyclic endurance test, pull test, closure test, drop test, immersion test, aging test, xenon arc type light exposure test, and water exposure test.
SDO | ASTM: ASTM International |
Document Number | F2234 |
Publication Date | March 1, 2008 |
Language | en - English |
Page Count | 6 |
Revision Level | 08 |
Supercedes | |
Committee | F15.10 |