Logo

ASTM F1839-01(2007)

Historical Reaffirmation

Standard Specification for Rigid Polyurethane Foam for Use as a Standard Material for Testing Orthopedic Devices and Instruments

$83.00

$83.00

$149.40


Sub Total (1 Item(s))

$ 0.00

Estimated Shipping

$ 0.00

Total (Pre-Tax)

$ 0.00


...

1.1 This specification covers rigid unicellular polyurethane foam for use as a standard material for performing mechanical tests utilizing orthopedic devices or instruments. The specification is applicable to sheets or blocks of foam, or foam that is made by the user using a two-part liquid mixture.

1.2 This specification covers polyurethane foam material that is used in the laboratory for mechanical testing, as described in . These materials are not intended for implantation into the human body.

1.3 The foam described herein possesses mechanical properties which are on the order of those reported for human cancellous bone. See Appendix X1 Rationale for further information regarding the appropriateness of using the specified foam as a model for human cancellous bone.

1.4 This specification covers compositional requirements, physical requirements, mechanical requirements, and test methods for rigid polyurethane foam in the solid final form.

1.5 This specification provides qualification criteria for vendor or end-user processes and acceptance criteria for individual material lots.

1.6 This specification provides mechanical properties of five different grades of foam in the solid final form. A foam that does not meet the specified mechanical properties shall be identified as an ungraded foam.

1.7 Unless otherwise indicated, the values stated in SI units are to be regarded as standard. The values in parentheses are given for information only.

The following precautionary statement pertains to the test method portion only, Section 8, of this specification: This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.


This specification covers rigid polyurethane foam blocks or sheets recommended for use as a standard material for mechanical testing using orthopedic devices and instruments. Although the physical properties of the foam are in the order of those reported for human cancellous bones, these materials are not intended for implantation into the human body. All materials should conform to the specified quality of appearance, dimensional stability, and composition, and values of void content, compressive strength, compressive modulus, shear strength, shear modulus, and screw pullout.


SDO ASTM: ASTM International
Document Number F1839
Publication Date Oct. 1, 2007
Language en - English
Page Count 6
Revision Level 01(2007)
Supercedes
Committee F04.21
Publish Date Document Id Type View
Oct. 1, 2012 F1839-08R12E01 Revision
Nov. 15, 2008 F1839-08E02 Revision
Nov. 15, 2008 F1839-08E01 Revision
Nov. 15, 2008 F1839-08 Revision
Oct. 10, 2001 F1839-97 Revision
Oct. 10, 2001 F1839-01 Revision
Feb. 1, 2021 F1839-08R21 Reaffirmation
Oct. 1, 2016 F1839-08R16 Reaffirmation
Oct. 1, 2012 F1839-08R12 Reaffirmation
Oct. 1, 2007 F1839-01R07 Reaffirmation