Logo

ASTM F1838-98(2008)

Historical Revision

Standard Performance Requirements for Child's Plastic Chairs for Outdoor Use (Withdrawn 2017)

$73.00

$73.00

$131.40


Sub Total (1 Item(s))

$ 0.00

Estimated Shipping

$ 0.00

Total (Pre-Tax)

$ 0.00


...

1.1 These standard performance requirements establish nationally recognized performance requirements for Class A (residential) and Class B (nonresidential) child's plastic chairs intended for outdoor use.

1.2 These standard performance requirements are not applicable to chaises, multi-positional chairs, upholstered chairs, or other types of furniture.

1.3 These standard performance requirements cover the performance of product regarding aspects of outdoor weathering, impact, static load, and rear leg testing.

1.4 Products Manufactured from Recycled Plastics:

1.4.1 Products may be manufactured from recycled plastics as long as the performance requirements are met.

1.5 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.

1.6 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Tests and criteria as outlined determine the overall usability and stability of chairs in an environment simulating the conditions of use.

Tests simulate two types of surfaces:

Smooth surfaces such as linoleum, wet pool decks, etc. The glass testing base (see Fig. 2) is used to simulate this surface.

Rough surfaces such as wooden decks, outdoor natural surfaces, etc. The plywood testing base (see Fig. 3) is used to simulate this surface.


Note 1—(A) Poly(methyl methacrylate) sheet, 0.25 ± 0.03-in. (6 ± 0.1-mm) thickness; (B) AC exterior glue fir plywood sheet, 0.75 ± 0.08 in. (19 ± 0.2 mm) or greater in thickness; (C) polypropylene microfoam sheet; 0.7 ± 0.01-lb/ft3 (11 ± 0.2-kg/m3) density and 0.13 ± 0.01-in. (3 ± 0.03-mm) thickness; and (D) glass/tempered sheet, 0.38 ± 0.04-in. (10 ± 0.1-mm) thickness.

Note 2—(A), (B), (C), and (D) shall be roughly the same dimensions, 48 in. (1219 mm) or greater.

FIG. 2 Glass Testing Base


Note 1—(A) Poly(methyl methacrylate) sheet, 0.25 ± 0.03-in. (6 ± 0.1-mm) thickness; and (B) AC exterior glue fir plywood sheet, 0.75 ± 0.08 in. (19 ± 0.2 mm) or greater in thickness.

Note 2—(A) and (B) shall be roughly the same dimensions, 48 in. (1219 mm) or greater.

FIG. 3 Plywood Testing Base

SDO ASTM: ASTM International
Document Number F1838
Publication Date Aug. 1, 2008
Language en - English
Page Count 4
Revision Level 98(2008)
Supercedes
Committee F15.33
Publish Date Document Id Type View
Aug. 1, 2019 F1838-19 Revision
June 1, 2018 F1838-18 Revision
Aug. 1, 2008 F1838-98R08 Revision
Jan. 10, 1998 F1838-98 Revision
June 1, 2004 F1838-98R04E01 Reaffirmation