Logo

ASTM F1387-99

Historical Revision

Standard Specification for Performance of Piping and Tubing Mechanically Attached Fittings

$119.00

$119.00

$214.20


Sub Total (1 Item(s))

$ 0.00

Estimated Shipping

$ 0.00

Total (Pre-Tax)

$ 0.00


Document Preview Not Available...

1.1 This specification establishes the performance characteristics required for Mechanically Attached Fittings (MAF). Mechanically Attached Fittings provide a fitting to pipe or tube connection, or both, by means other than welding, brazing, or threading. Successful completion of the tests described constitutes completion of the technical portion of the qualification process.

1.2 Supplementary requirements are provided for use when additional testing or inspection is desired. These shall apply only when specified in part or whole by the purchaser in the order. Unless otherwise specified, U.S. Navy contracts shall invoke the supplementary requirements in whole.

1.3 The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only.

1.4 The following safety hazards caveat applies only to the tests listed in Section 13 and the tests described in the Supplementary Section and the Annex of this specification: This standard does not purport to address all of the safety problems, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

1.5 Unless specific MAF types are specified, the term "MAF" shall apply to all types described herein.

1.6 The tests specified in Section 13 and described in Annex A1 and Supplementary Requirements are applicable only to ascertain the performance characteristics of MAF. These tests are not intended for use in the evaluation of non-MAF products.

1.7 A fire performance test is specified in Supplementary Requirement S7. This test provides general guidelines to determine the responsiveness of MAF when subjected to fire. This test should not be considered for use to evaluate non-MAF products.


SDO ASTM: ASTM International
Document Number F1387
Publication Date June 10, 1999
Language en - English
Page Count 27
Revision Level 99
Supercedes
Committee F25.11
Publish Date Document Id Type View
July 1, 2023 F1387-23 Revision
Sept. 15, 2019 F1387-19 Revision
June 10, 1999 F1387-99 Revision
Not Available F1387-93R98 Revision
May 1, 2012 F1387-99R12 Reaffirmation
July 1, 2005 F1387-99R05 Reaffirmation