Logo

ASTM E607-02

Current Revision

Standard Test Method for Atomic Emission Spectrometric Analysis Aluminum Alloys by the Point to Plane Technique Nitrogen Atmosphere

$83.00

$83.00

$149.40


Sub Total (1 Item(s))

$ 0.00

Estimated Shipping

$ 0.00

Total (Pre-Tax)

$ 0.00


Stay effortlessly up-to-date with the latest standard revisions. When new versions are released, they're automatically charged and delivered to you, ensuring seamless compliance.

...

1.1 This test method covers the spectrochemical analysis of aluminum and aluminum alloys for the following elements in the concentration ranges indicated:

ElementConcentration Range, %
Silicon0.001 to 23.0
Copper0.001 to 20.0
Magnesium0.001 to 11.0
Zinc0.001 to 10.0
Tin0.001 to 7.5
Nickel0.001 to 4.0
Iron0.001 to 3.0
Lithium0.0001 to 3.0
Cobalt0.001 to 2.0
Manganese0.001 to 2.0
Chromium0.001 to 1.0
Silver0.001 to 1.0
Zirconium0.001 to 1.0
Lead0.002 to 0.7
Bismuth0.001 to 0.7
Cadmium0.001 to 0.5
Titanium0.001 to 0.5
Beryllium0.0001 to 0.5
Vanadium0.001 to 0.15
Calcium0.001 to 0.05
Gallium0.001 to 0.05
Boron0.0001 to 0.05
Sodium0.0001 to 0.05

1.2 The test method is applicable primarily to the control analysis of chill-cast samples. Other forms may be analyzed, provided that (1) they are sufficiently massive to prevent undue heating; (2) they permit machining flat surfaces having a minimum dimension of approximately 30 by 30 mm (1.2 in. by 1.2 in.); and (3) reference materials of similar metallurgical condition and chemical composition are available.

1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.


This test method is suitable for manufacturing control, for material or product acceptance, and for research and development. Its use over several years has shown precision and accuracy that are well within expected levels.

It is assumed that all who use this test method will be trained analysts capable of performing laboratory procedures skillfully and safely, and that the work will be performed in a properly equipped laboratory.

SDO ASTM: ASTM International
Document Number E607
Publication Date Oct. 10, 2002
Language en - English
Page Count 9
Revision Level 02
Supercedes
Committee E01.04
Publish Date Document Id Type View
Oct. 10, 2002 E0607-02 Revision
Jan. 1, 1996 E0607-90R96 Reaffirmation