Loading...
1.1 These test methods apply to the chemical analysis of refined nickel and other forms of metallic nickel having chemical compositions within the following limits:
| Element | Mass Fraction, % |
|
|
|
| Antimony, less than | 0.005 |
| Arsenic, less than | 0.005 |
| Bismuth, less than | 0.01 |
| Cadmium, less than | 0.0025 |
| Carbon, max | 0.03 |
| Cobalt, max | 1.00 |
| Copper, max | 1.00 |
| Hydrogen, max | 0.003 |
| Iron, max | 0.15 |
| Lead, less than | 0.01 |
| Manganese, less than | 0.20 |
| Nickel, min | 98.0 |
| Nitrogen, less than | 0.50 |
| Oxygen, less than | 0.03 |
| Phosphorus, less than | 0.005 |
| Selenium, less than | 0.0010 |
| Silicon, less than | 0.005 |
| Silver, less than | 0.01 |
| Sulfur, max | 0.01 |
| Tellurium, less than | 0.0010 |
| Thallium, less than | 0.0010 |
| Tin, less than | 0.005 |
| Zinc, less than | 0.015 |
1.2 These test methods may be used to determine the following elements by the methods indicated below:
| Test Methods | Sections |
|
|
|
| Antimony, Arsenic, Bismuth, Cadmium, Lead, Selenium, Silver, Tellurium, Tin, and Thallium by the Graphite Furnace Atomic Absorption Spectrometric Method | 21 – 31 |
|
|
|
| Bismuth, Cadmium, Cobalt, Copper, Iron, Lead, Manganese, Silver, and Zinc by the Flame Atomic Absorption Spectrometric Method | 9 – 20 |
|
|
|
| Sulfur by the Methylene Blue Spectrophotometric Method After Generation of Hydrogen Sulfide | 32 – 42 |
1.3 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.
1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. For specific precautions, see Section 6.
1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
4.1 These test methods are primarily intended to test refined nickel metal for compliance with compositional specifications. It is assumed that all who use these test methods will be trained analysts capable of performing common laboratory procedures skillfully and safely. It is expected that the analytical work will be performed in a properly equipped laboratory under appropriate quality control practices.
| SDO | ASTM: ASTM International |
| Document Number | E1587 |
| Publication Date | April 1, 2017 |
| Language | en - English |
| Page Count | 13 |
| Revision Level | 17 |
| Supercedes | |
| Committee | E01.08 |
We're glad to see you again! Please enter your email and password to continue
Need an account?
Register for an account to join our community! Gain access to exclusive content, participate in discussions, and stay updated on the latest news.
Have an account?
Forgot your password? No worries! Please enter your email to reset your password. If your email exists in our system, you will receive a password reset link.
Have an account?
We've sent an email to reset your password if an account with that email exists. Please check your inbox and follow the instructions in the email. If you don't see the email, please check your spam folder.
We have sent a verification email to you. Please check your inbox and follow the instructions in the email to verify your account. If you don't see the email, please check your spam folder.