Logo

ASTM E1086-22

Current Revision

Standard Test Method for Analysis of Austenitic Stainless Steel by Spark Atomic Emission Spectrometry

$69.00

$69.00

$124.20

$83.00

$83.00

$149.40



Sub Total (1 Item(s))

$ 0.00

Estimated Shipping

$ 0.00

Total (Pre-Tax)

$ 0.00


Stay effortlessly up-to-date with the latest standard revisions. When new versions are released, they're automatically charged and delivered to you, ensuring seamless compliance.

Document Preview Not Available...

1.1 This test method2 covers the analysis of austenitic stainless steel by spark atomic emission spectrometry for the following elements in the ranges shown

Element

Composition Range, %

Chromium

17.0   to 23.0

Nickel

 7.5   to 13.0

Molybdenum

 0.01  to 3.0  

Manganese

 0.01  to 2.0  

Silicon

 0.01  to 0.90

Copper

 0.01  to 0.30

Carbon

 0.005 to 0.25

Phosphorus

 0.003 to 0.15

Sulfur

   0.003 to 0.065

1.2 This test method is designed for the analysis of chill-cast disks or inspection testing of stainless steel samples that have a flat surface of at least 13 mm (0.5 in.) in diameter. The samples must be sufficiently massive to prevent overheating during the discharge and of a similar metallurgical condition and composition as the reference materials.

1.3 One or more of the reference materials must closely approximate the composition of the specimen. The technique of analyzing reference materials with unknowns and performing the indicated mathematical corrections (typically referred to as type standardization) may also be used to correct for interference effects and to compensate for errors resulting from instrument drift. A variety of such systems are commonly used. Any of these that will achieve analytical accuracy equivalent to that reported for this test method are acceptable.

1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.

1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.


5.1 The chemical composition of stainless steels must be determined accurately to ensure the desired metallurgical properties. This test method is suitable for manufacturing control and inspection testing.

SDO ASTM: ASTM International
Document Number E1086
Publication Date Aug. 15, 2022
Language en - English
Page Count 5
Revision Level 22
Supercedes
Committee E01.01
Publish Date Document Id Type View
Aug. 15, 2022 E1086-22 Revision
March 1, 2014 E1086-14 Revision
Oct. 1, 2008 E1086-08 Revision
Jan. 1, 2005 E1086-94R05 Reaffirmation
Jan. 1, 2000 E1086-94R00 Reaffirmation