Logo

ASTM D6278-07

Historical Revision

Standard Test Method for Shear Stability of Polymer Containing Fluids Using a European Diesel Injector Apparatus

$83.00

$83.00

$149.40


Sub Total (1 Item(s))

$ 0.00

Estimated Shipping

$ 0.00

Total (Pre-Tax)

$ 0.00


Stay effortlessly up-to-date with the latest standard revisions. When new versions are released, they're automatically charged and delivered to you, ensuring seamless compliance.

...

1.1 This test method covers the evaluation of the shear stability of polymer-containing fluids. The test method measures the percent viscosity loss at 100°C of polymer-containing fluids when evaluated by a diesel injector apparatus procedure that uses European diesel injector test equipment. The viscosity loss reflects polymer degradation due to shear at the nozzle.

Note 1—Test Method D 2603 has been used for similar evaluation of shear stability; limitations are as indicated in the significance statement. No detailed attempt has been undertaken to correlate the results of this test method with those of the sonic shear test method.

Note 2—This test method uses test apparatus as defined in CEC L-14-A-93. This test method differs from CEC-L-14-A-93 in the period of time required for calibration.

Note 3—Test Method D 5275 also shears oils in a diesel injector apparatus but may give different results.

Note 4—This test method has different calibration and operational requirements than withdrawn Test Method D 3945.

Note 5—Test Method D 7109 is a similar procedure that measures shear stability at both 30 and 90 injection cycles. This test method uses 30 injection cycles only.

1.2 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. Specific precautionary statements are given in Section 8.

This test method evaluates the percent viscosity loss for polymer-containing fluids resulting from polymer degradation in the high shear nozzle device. Thermal or oxidative effects are minimized.

This test method is used for quality control purposes by manufacturers of polymeric lubricant additives and their customers.

This test method is not intended to predict viscosity loss in field service in different field equipment under widely varying operating conditions, which may cause lubricant viscosity to change due to thermal and oxidative changes as well as by the mechanical shearing of polymer. However, when the field service conditions, primarily or exclusively, result in the degradation of polymer by mechanical shearing, there may be a correlation between the results from this test method and results from the field.

SDO ASTM: ASTM International
Document Number D6278
Publication Date Dec. 1, 2007
Language en - English
Page Count 9
Revision Level 07
Supercedes
Committee D02.07
Publish Date Document Id Type View
June 1, 2020 D6278-20A Revision
May 1, 2020 D6278-20 Revision
Jan. 1, 2017 D6278-17E01 Revision
Jan. 1, 2017 D6278-17 Revision
Nov. 1, 2012 D6278-12E01 Revision
Dec. 1, 2007 D6278-07 Revision
April 10, 2002 D6278-98 Revision
April 10, 2002 D6278-02 Revision