Logo

ASTM D6251/D6251M-07

Historical Revision

Standard Specification for Wood-Cleated Panelboard Shipping Boxes

$91.00

$91.00

$163.80


Sub Total (1 Item(s))

$ 0.00

Estimated Shipping

$ 0.00

Total (Pre-Tax)

$ 0.00


Stay effortlessly up-to-date with the latest standard revisions. When new versions are released, they're automatically charged and delivered to you, ensuring seamless compliance.

Document Preview Not Available...

1.1 This specification covers the fabrication and closure of empty and full wood-cleated, hereafter referred to as wood-cleated, panelboard boxes. These boxes are intended for use as containers for domestic and overseas shipment of general materials and supplies, not exceeding 1000 lb [454 kg] depending on box type (see 10.1).

1.2 Wood-cleated panelboard shipping box performance is dependent on its fabricated components and subsequent assembly; therefore, a variety of types, classes, styles, and treatments reflecting varied performance are specified. This specification, however, does not cover wood-cleated panelboard box performance under all atmospheric, handling, shipping, and storage conditions.

1.3 If the use of other construction methods or techniques is acceptable and permitted (see ), the resulting packaging systems shall be of equal or better performance than would result from the use of these specified materials and procedures. The appropriate distribution cycle, specified in Practice D 4169, can be used to develop comparative procedures and criteria.

1.4 The values stated in either inch-pound units or SI units are to be regarded separately as standard. Within the text, the SI units are shown in brackets. The values stated in each system are not exact equivalents; therefore, each system must be used independently of the other. Combining values from the two systems may result in nonconformance with the standard. See IEEE/ASTM SI 10 for conversion of units.

This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of the standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.


SDO ASTM: ASTM International
Document Number D6251
Publication Date June 1, 2007
Language en - English
Page Count 17
Revision Level 07
Supercedes
Committee D10.12
Publish Date Document Id Type View
Oct. 1, 2023 D6251_D6251M-23 Revision
Aug. 1, 2019 D6251_D6251M-19 Revision
April 1, 2011 D6251_D6251M-11 Revision
June 1, 2007 D6251_D6251M-07E02 Revision
June 1, 2007 D6251_D6251M-07E01 Revision
June 1, 2007 D6251_D6251M-07 Revision
Oct. 10, 2001 D6251_D6251M-01 Revision
Oct. 10, 2001 D6251_D6251M-00 Revision