Logo

ASTM D5448/D5448M-16

Historical Revision

Standard Test Method for Inplane Shear Properties of Hoop Wound Polymer Matrix Composite Cylinders

$91.00

$91.00

$163.80


Sub Total (1 Item(s))

$ 0.00

Estimated Shipping

$ 0.00

Total (Pre-Tax)

$ 0.00


Stay effortlessly up-to-date with the latest standard revisions. When new versions are released, they're automatically charged and delivered to you, ensuring seamless compliance.

...

1.1 This test method determines the inplane shear properties of wound polymer matrix composites reinforced by high-modulus continuous fibers. It describes testing of hoop wound (90°) cylinders in torsion for determination of inplane shear properties.

1.2 The technical content of this standard has been stable since 1993 without significant objection from its stakeholders. As there is limited technical support for the maintenance of this standard, changes since that date have been limited to items required to retain consistency with other ASTM D30 Committee standards, including editorial changes and incorporation of updated guidance on specimen preconditioning and environmental testing. The standard, therefore, should not be considered to include any significant changes in approach and practice since 1993. Future maintenance of the standard will only be in response to specific requests and performed only as technical support allows.

1.3 The values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in non-conformance with the standard.

1.3.1 Within the text the inch-pound units are shown in brackets.

1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.


5.1 This test method is designed to produce inplane shear property data for material specifications, research and development, quality assurance, and structural design and analysis. Factors that influence the inplane shear response and should therefore be reported are material, method of material preparation, specimen preparation, specimen conditioning, environment of testing, specimen alignment and gripping, speed of testing, void content, and fiber volume fraction. Properties, in the test direction, that may be obtained from this test method are as follows:

5.1.1 Inplane Shear Strength, τ12u,

5.1.2 Inplane Shear Strain at Failure, γ12u , and 

5.1.3 Inplane Shear Modulus, G12.

SDO ASTM: ASTM International
Document Number D5448
Publication Date July 1, 2016
Language en - English
Page Count 13
Revision Level 16
Supercedes
Committee D30.04
Publish Date Document Id Type View
May 1, 2022 D5448_D5448M-22 Revision
July 1, 2016 D5448_D5448M-16 Revision
Nov. 15, 2011 D5448_D5448M-11 Revision
Jan. 1, 2000 D5448_D5448M-93 Revision
Jan. 15, 2006 D5448_D5448M-93R06 Reaffirmation
Jan. 1, 2000 D5448_D5448M-93R00 Reaffirmation