Logo

ASTM D3597-02(2018)e1

Current Revision

Standard Performance Specification for Woven Upholstery Fabrics—Plain, Tufted, or Flocked

$73.00

$73.00

$131.40

$0.00

$0.00

$0.00



Sub Total (1 Item(s))

$ 0.00

Estimated Shipping

$ 0.00

Total (Pre-Tax)

$ 0.00


Stay effortlessly up-to-date with the latest standard revisions. When new versions are released, they're automatically charged and delivered to you, ensuring seamless compliance.

...

1.1 This performance specification covers the performance requirements for plain, tufted, or flocked woven upholstery fabrics as used in the manufacture of new indoor furniture. These requirements apply to both the warp and filling directions for those factors where each fabric direction is pertinent.

1.2 This performance specification is not applicable to fabrics used in porch, deck, or lawn furniture; nor for knitted fabrics, bonded or laminated fabrics, or surface-coated fabrics (such as vinyls and urethanes).

1.3 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.

1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.

1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.


This performance specification covers the performance requirements for plain, tufted, or flocked woven upholstery fabrics as used in the manufacture of new indoor furniture. These requirements apply to both the warp and filling directions for those factors where each fabric direction is pertinent. Tests shall be made to determine the properties of the material in accordance with the following test methods: breaking strength; tear strength; resistance to yarn slippage; surface abrasion; dimensional change; colorfastness to water; colorfastness to solvent; colorfastness to burnt gas fumes; colorfastness to crocking; colorfastness to light; colorfastness to ozone; durability of back coating; flammability; and FTC requirements.


4.1 Fabrics intended for this end-use should meet all of the requirements listed in Table 1.

(A) For guideline purposes see 6.4.1.
(B) Class in the colorfastness requirements is based on a numerical scale of 5 for negligible for no colorchange or color transfer to 1 for very severe color change or color transfer.
(C) For guidelines purposes—See Section 6.6.2.
(D) AATCC Gray Scale for Color Change.
(E) AATCC 9-Step Chromatic Transference Scale.

4.2 It should be recognized that fabrics can be produced utilizing an almost infinite number of combinations of construction variables (e.g., type of fibers, percentage of fibers, yarn twist, yarn number, warp and pick count, chemical and mechanical finished). Additionally, fashion or aesthetics dictate that the ultimate consumer may find acceptable articles made from fabrics that do not conform to all of the requirements in  Table 1.

4.2.1 Hence, no single performance specification can possibly apply to all the various fabrics that could be utilized for this end-use.

4.3 The uses and significance of particular properties and test methods are discussed in the appropriate section of the specified test methods.

SDO ASTM: ASTM International
Document Number D3597
Publication Date Dec. 15, 2018
Language en - English
Page Count 4
Revision Level 02(2018)e1
Supercedes
Committee D13.63
Publish Date Document Id Type View
Dec. 15, 2018 D3597-02R18E01 Revision
April 10, 2002 D3597-02 Revision
Dec. 10, 1995 D3597-95A Revision
June 1, 2024 D3597-02R24 Reaffirmation
Oct. 1, 2013 D3597-02R13 Reaffirmation
Sept. 1, 2009 D3597-02R09 Reaffirmation
Aug. 1, 2008 D3597-02R08 Reaffirmation
Dec. 10, 1995 D3597-95AR01 Reaffirmation