Logo

ASTM D350-13

Historical Revision

Standard Test Methods for Flexible Treated Sleeving Used for Electrical Insulation

$83.00

$83.00

$149.40


Sub Total (1 Item(s))

$ 0.00

Estimated Shipping

$ 0.00

Total (Pre-Tax)

$ 0.00


Stay effortlessly up-to-date with the latest standard revisions. When new versions are released, they're automatically charged and delivered to you, ensuring seamless compliance.

...

1.1 These test methods cover procedures for testing electrical insulating sleeving comprising a flexible tubular product made from a woven textile fibre base, such as cotton, rayon, nylon, or glass, thereafter impregnated, or coated, or impregnated and coated, with a suitable dielectric material.

1.2 The procedures appear in the following sections:

Procedures

Sections

 

 

Brittleness Temperature

18 to 21

Compatibility of Sleeving with Magnet Wire Insulation

45 to 59

Conditioning

 6

Dielectric Breakdown Voltage

12 to 17

Dielectric Breakdown Voltage After Short-Time Aging

29 to 33

Dimensions

 7 to 11

Effect of Push-Back After Heat Aging

73 to 78

Flammability

22 to 28

Hydrolytic Stability

66 to 72

Oil Resistance

34 to 37

Selection of Test Material

5

Solvent Resistance

60 to 65

Thermal Endurance

38 to 44


1.3 The values stated in inch-pound units, except for °C, are to be regarded as the standard. The values in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.

1.4 This is a fire-test-response standard. See Sections 22 through 28, which are the procedures for flammability tests.

1.5 This standard measures and describes the response of materials, products, or assemblies to heat and flame under controlled conditions, but does not by itself incorporate all factors required for fire hazard or fire risk assessment of the materials, products or assemblies under actual fire conditions.

1.6 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. For specific hazard statements, see 45.2 and 63.1.1.

Note 1This standard resembles IEC 60684-2, Specification for Flexible Insulating Sleeving—Part 2 Methods of Test, in a number of ways, but is not consistently similar throughout. The data obtained using either standard are not necessarily technically equivalent.

1.7 Fire testing is inherently hazardous. Adequate safeguards for personnel and property shall be employed in conducting these tests.


12.1 The dielectric breakdown voltage of the sleeving is of importance as a measure of its ability to withstand electrical stress without failure. This value does not correspond to the dielectric breakdown voltage expected in service, but is of value in comparing different materials or different lots, in controlling manufacturing processes or, when coupled with experience, for a limited degree of design work. The comparison of dielectric breakdown voltage of the same sleeving before and after environmental conditioning (moisture, heat, and the like) gives a measure of its ability to resist these effects. For a more detailed discussion, refer to Test Method D149.

SDO ASTM: ASTM International
Document Number D350
Publication Date Nov. 1, 2013
Language en - English
Page Count 10
Revision Level 13
Supercedes
Committee D09.07
Publish Date Document Id Type View
Jan. 1, 2021 D0350-21 Revision
Nov. 1, 2013 D0350-13 Revision
Oct. 1, 2009 D0350-09 Revision
May 1, 2008 D0350-08 Revision
Sept. 10, 2001 D0350-96 Revision
Sept. 10, 2001 D0350-01 Revision