Logo

ASTM D2983-09

Historical Revision

Standard Test Method for Low-Temperature Viscosity of Automatic Transmission Fluids, Hydraulic Fluids, and Lubricants using a Rotational Viscometer

$91.00

$91.00

$163.80

$0.00

$0.00

$0.00



Sub Total (1 Item(s))

$ 0.00

Estimated Shipping

$ 0.00

Total (Pre-Tax)

$ 0.00


Stay effortlessly up-to-date with the latest standard revisions. When new versions are released, they're automatically charged and delivered to you, ensuring seamless compliance.

...

1.1 This test method covers the use of Brookfield viscometers of appropriate torque for the determination of the low-shear-rate viscosity of lubricants. The test is applied over the viscosity range of 500 to 900 000 mPa·s within a low temperature range appropriate to the capacity of the viscometer head.

1.2 The range of viscosity used to generate the precision data for this test method was from 1000 to 900 000 mPa·s. Appendix X4 lists another interlaboratory study that specifically targeted hydraulic fluid ranging from 500 to 1700 mPa·s.

1.3 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.

1.3.1 The test method uses the SI unit, milliPascal-second (mPa·s), as the unit of viscosity. (1 cP = 1 mPa·s).

1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

The low-temperature, low-shear-rate viscosity of automatic transmission fluids, gear oils, torque and tractor fluids, and industrial and automotive hydraulic oils (see Annex A4) are of considerable importance to the proper operation of many mechanical devices. Measurement of the viscometric properties of these oils and fluids at low temperatures is often used to specify their acceptance for service. This test method is used in a number of specifications.

This test method describes how to measure apparent viscosity directly without the errors associated with earlier techniques using extrapolation of experimental viscometric data obtained at higher temperatures.

Note 1—Low temperature viscosity values obtained by either interpolation or extrapolation of oils may be subject to errors caused by gelation and other forms of non-Newtonian response to spindle speed and torque. Only in the case of known Newtonian oils at the temperature desired is interpolation acceptable for the purpose of calibrating the spindle and glass cell (see Annex A1).

SDO ASTM: ASTM International
Document Number D2983
Publication Date Aug. 1, 2009
Language en - English
Page Count 14
Revision Level 09
Supercedes
Committee D02.07
Publish Date Document Id Type View
Nov. 1, 2023 D2983-23 Revision
July 1, 2022 D2983-22 Revision
Nov. 1, 2021 D2983-21 Revision
Nov. 1, 2020 D2983-20 Revision
June 15, 2019 D2983-19E01 Revision
June 15, 2019 D2983-19 Revision
May 1, 2017 D2983-17 Revision
Dec. 15, 2016 D2983-16 Revision
Oct. 15, 2015 D2983-15 Revision
Aug. 1, 2009 D2983-09 Revision
May 1, 2004 D2983-04A Revision
Feb. 1, 2004 D2983-04 Revision
Aug. 10, 2003 D2983-03 Revision
Nov. 10, 2002 D2983-02B Revision
Aug. 10, 2002 D2983-02A Revision
May 10, 2002 D2983-02 Revision
Aug. 10, 2001 D2983-01 Revision
Aug. 10, 2001 D2983-87R93 Reaffirmation