Logo

ASTM D1623-03

Historical Revision

Standard Test Method for Tensile and Tensile Adhesion Properties of Rigid Cellular Plastics

$83.00

$83.00

$149.40


Sub Total (1 Item(s))

$ 0.00

Estimated Shipping

$ 0.00

Total (Pre-Tax)

$ 0.00


Stay effortlessly up-to-date with the latest standard revisions. When new versions are released, they're automatically charged and delivered to you, ensuring seamless compliance.

...

1.1 This test method covers the determination of the tensile and tensile adhesion properties of rigid cellular materials in the form of test specimens of standard shape under defined conditions of temperature, humidity, and testing machine speed.

1.2 Tensile properties shall be measured using any of three types of specimens:

1.2.1 Type A shall be the preferred specimen in those cases where enough sample material exists to form the necessary specimen,

1.2.2 Type B shall be the preferred specimen when only smaller specimens are available, as in sandwich panels, etc.

1.2.3 Type C shall be the preferred specimen for the determination of tensile adhesive properties of a cellular plastic to a substrate as in a sandwich panel or the bonding strength of a cellular plastic to a single substrate.

Note 1—The values stated in SI units are to be regarded as the standard.

Note 2—There is no equivalent ISO standard.


This test method establishes standard procedure for determining the tensile and tensile adhesion properties of rigid cellular plastics in the form of test specimens of standard shape under defined conditions of temperature, humidity, and testing machine speed. Tensile properties shall be measured using any of three types of specimens: Type A shall be the preferred specimen in those cases where enough sample material exists to form the necessary specimen; Type B shall be the preferred specimen when only smaller specimens are available, as in sandwich panels, etc.; Type C shall be the preferred specimen for the determination of tensile adhesive properties of a cellular plastic to a substrate as in a sandwich panel or the bonding strength of a cellular plastic to a single substrate. This test method requires the use of the following apparatuses: a constant-rate-of-crosshead-movement type testing machine; self-aligning type grips for holding test specimens; an extension indicator; and a lathe specimen cutter.


SDO ASTM: ASTM International
Document Number D1623
Publication Date March 10, 2003
Language en - English
Page Count 6
Revision Level 03
Supercedes
Committee D20.22
Publish Date Document Id Type View
May 1, 2017 D1623-17 Revision
Sept. 1, 2009 D1623-09 Revision
March 10, 2003 D1623-03 Revision
May 1, 2023 D1623-17R23 Reaffirmation
Jan. 1, 1995 D1623-78R95 Reaffirmation