Logo

ASTM D1264-24

Historical Revision

Standard Test Method for Determining the Water Washout Characteristics of Lubricating Greases

$73.00

$73.00

$131.40


Sub Total (1 Item(s))

$ 0.00

Estimated Shipping

$ 0.00

Total (Pre-Tax)

$ 0.00


Stay effortlessly up-to-date with the latest standard revisions. When new versions are released, they're automatically charged and delivered to you, ensuring seamless compliance.

Document Preview Not Available...

1.1 This test method covers the evaluation of the resistance of a lubricating grease to washout by water from a bearing, when tested at 38 °C and 79 °C (100 °F and 175 °F) under the prescribed laboratory conditions. It is not to be considered the equivalent of service evaluation tests. Precision and bias was determined using grease ranging from NLGI 3 to 0 grades in the research report (see Section 10).

1.2 This test method may not be suitable for some greases containing highly volatile components. This test method does not attempt to account for sample evaporation. It is the user's responsibility to determine if evaporation of the sample is a significant contributor to mass loss at the required drying temperature.

1.3 The values stated in SI units are to be regarded as standard. The values given in parentheses after SI units are provided for information only and are not considered standard.

1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. For specific warning statements, see 6.3.

1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.


4.1 This test method estimates the resistance of greases to water washout from ball bearings under conditions of the test. No correlation with field service has been established.

SDO ASTM: ASTM International
Document Number D1264
Publication Date Dec. 1, 2024
Language en - English
Page Count 4
Revision Level 24
Supercedes
Committee D02.G0.06
Publish Date Document Id Type View
Dec. 15, 2024 D1264-24A Revision
Dec. 1, 2024 D1264-24 Revision
Sept. 1, 2018 D1264-18E01 Revision
Sept. 1, 2018 D1264-18 Revision
April 1, 2016 D1264-16 Revision
Dec. 1, 2012 D1264-12 Revision
May 1, 2011 D1264-11 Revision
June 10, 2003 D1264-03E01 Revision
June 10, 2003 D1264-03 Revision
Dec. 10, 2000 D1264-96 Revision
Dec. 10, 2000 D1264-00 Revision
Dec. 1, 2008 D1264-03R08 Reaffirmation