Logo

ASTM C67-17

Current Revision

Standard Test Methods for Sampling and Testing Brick and Structural Clay Tile

$91.00

$91.00

$163.80

$0.00

$0.00

$0.00



Sub Total (1 Item(s))

$ 0.00

Estimated Shipping

$ 0.00

Total (Pre-Tax)

$ 0.00


Stay effortlessly up-to-date with the latest standard revisions. When new versions are released, they're automatically charged and delivered to you, ensuring seamless compliance.

Document Preview Not Available...

1.1 These test methods cover procedures for the sampling and testing of brick and structural clay tile. Although not necessarily applicable to all types of units, tests include modulus of rupture, compressive strength, absorption, saturation coefficient, effect of freezing and thawing, efflorescence, initial rate of absorption and determination of weight, size, warpage, length change, and void area. (Additional methods of test pertinent to ceramic glazes include imperviousness, chemical resistance, opacity, and resistance to crazing.

1.2 The text of this standard references notes and footnotes which provide explanatory material. These notes and footnotes (excluding those in tables and figures) shall not be considered as requirements of the standard.

Note 1: The testing laboratory performing this test method should be evaluated in accordance with Practice C1093.

1.3 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.

1.4 These test methods include the following sections:

Section Heading

Section

Scope

1

Referenced Documents

2

Terminology

3

Sampling

4

Specimen Preparation

5

Modulus of Rupture (Flexure Test)

6

Compressive Strength

7

Absorption

8

Freezing and Thawing

9

Initial Rate of Absorption (Suction) (Laboratory Test)

10

Efflorescence

11

Weight Per Unit Area

12

Measurement of Size

13

Measurement of Warpage

14

Measurement of Length Change

15

Initial Rate of Absorption (Suction) (Field Test)

16

Measurement of Void Area in Cored Units

17

Measurement of Void Area in Deep Frogged Units

18

Measurement of Out of Square

19

Measurement of Shell and Web Thickness

20

Breaking Load

21

Imperviousness Test (of Ceramin Glazes)

22

Chemical Resistance Test (of Ceramic Glazes)

23

Autoclaved Crazing Test (of Ceramic Glazes)

24

Opacity Test (of Ceramic Glazes)

25

Precision and Bias

26

Keywords

27

Safety Precautions for Autoclave Equipment and Operation

Appendix X1

1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

1.6 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.


These test methods cover procedures for the sampling and testing of brick and structural clay tile. The tests include modulus of rupture, compressive strength, absorption, saturation coefficient, effect of freezing and thawing, efflorescence, initial rate or absorption, and determination of weight, size, warpage, length chanange, and void areas. For purposes of these tests, full-size bricks, tiles, or solid masonry units shall be used as test specimens. They shall be representative of the lot of units from which they are to be selected in respect of the range of colors, textures, and sizes and shall be free of or brushed to remove dirt, mud, mortar, or other foreign materials unassociated with the manufacturing process.


SDO ASTM: ASTM International
Document Number C67
Publication Date June 1, 2017
Language en - English
Page Count 17
Revision Level 17
Supercedes
Committee C15.02
Publish Date Document Id Type View
June 1, 2017 C0067-17 Revision
Dec. 1, 2016 C0067-16 Revision
July 1, 2014 C0067-14 Revision
Dec. 1, 2013 C0067-13A Revision
July 1, 2013 C0067-13 Revision
June 1, 2012 C0067-12 Revision
June 1, 2011 C0067-11 Revision
June 1, 2009 C0067-09 Revision
Nov. 1, 2008 C0067-08 Revision
Dec. 1, 2007 C0067-07A Revision
Feb. 1, 2007 C0067-07 Revision
June 1, 2006 C0067-06 Revision
Nov. 15, 2005 C0067-05 Revision
June 10, 2003 C0067-03A Revision
Jan. 10, 2003 C0067-03 Revision
Oct. 10, 2002 C0067-02C Revision
Aug. 10, 2002 C0067-02B Revision
March 10, 2002 C0067-02A Revision
March 10, 2002 C0067-02 Revision
March 10, 2002 C0067-01 Revision
March 10, 2002 C0067-00 Revision