Logo

ASTM C410-08

Historical Revision

Standard Specification for Industrial Floor Brick

$73.00

$73.00

$131.40

$0.00

$0.00

$0.00



Sub Total (1 Item(s))

$ 0.00

Estimated Shipping

$ 0.00

Total (Pre-Tax)

$ 0.00


Stay effortlessly up-to-date with the latest standard revisions. When new versions are released, they're automatically charged and delivered to you, ensuring seamless compliance.

...

1.1 This specification covers brick made from clay or shale or mixtures thereof and are suitable for surfacing industrial floors. Ceramic shapes known as quarry tile are not covered by this specification. Four types of industrial floor brick are covered (Note 1):

1.1.1 Type TFor use where a high degree of resistance to thermal and mechanical shock is required but low absorption is not required.

1.1.2 Type HFor use where resistance to chemicals and thermal shock are service factors but low absorption is not required.

1.1.3 Type MFor use where low absorption is required. Brick of this type are normally characterized by limited mechanical (impact) shock resistance but are often highly resistant to abrasion.

1.1.4 Type LFor use where minimal absorption and a high degree of chemical resistance are required. Brick of this type are normally characterized by very limited thermal and limited mechanical (impact) shock resistance but are highly resistant to abrasion.

Note 1—Discussion of Types of Floor BrickThe four types of brick included in this specification are designed to cover the diverse needs of many industries for floor units. Recognizing that the requirements of primary aluminum producers are quite different from those of chemical manufacturers, and similarly, that the need of a builder for brick with which to pave an airport terminal building may vary considerably from those of food processing plants, for example, a minimum of four brick types has been deemed necessary. The factors of modulus of rupture, water absorption, and chemical resistance have been selected as the basis for the classification system.

1.2 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.


This specification covers brick made from clay or shale or mixtures thereof and are suitable for surfacing industrial floors. Four types of industrial floor bricks are covered: Types T, H, M, and L. Brick shall conform to the physical requirements for the type specified. Tolerances for deviation of face or edges of individual brick from a plane surface and from a straight line, respectively, shall not exceed the maximum values specified. The brick shall be sampled and tested for modulus of rupture, absorption, measurement of size, and measurement of warpage in accordance with the requirements specified and for chemical resistance in accordance with the sulfuric acid solubility test specified.


SDO ASTM: ASTM International
Document Number C410
Publication Date June 1, 2008
Language en - English
Page Count 2
Revision Level 08
Supercedes
Committee C15.02
Publish Date Document Id Type View
June 1, 2023 C0410-23 Revision
June 1, 2013 C0410-13 Revision
Dec. 15, 2011 C0410-11 Revision
Aug. 1, 2010 C0410-10 Revision
June 1, 2008 C0410-08 Revision
Dec. 1, 2017 C0410-13R17 Reaffirmation
June 10, 2003 C0410-60R03 Reaffirmation
Nov. 10, 1997 C0410-60R97 Reaffirmation