Logo

ASTM C1405-01

Historical Revision

Standard Specification for Glazed Brick (Single Fired, Brick Units)

$83.00

$83.00

$149.40


Sub Total (1 Item(s))

$ 0.00

Estimated Shipping

$ 0.00

Total (Pre-Tax)

$ 0.00


Stay effortlessly up-to-date with the latest standard revisions. When new versions are released, they're automatically charged and delivered to you, ensuring seamless compliance.

...

1.1 This specification covers brick, having a ceramic glaze finish fused to the body during the same process as the unit body firing, that are intended for use in masonry and supplying structural or facing components, or both, to the structure. This specification does not cover double-fired glazed brick. Some double-fired decorative glazes have physical properties which vary from those of single-fired glazes due to the lower temperatures used in applying the decorative coating.

1.2 The property requirements of this specification apply at the time of purchase. The use of results from testing of brick extracted from masonry structures for determining conformance or nonconformance to the property requirements of this specification is beyond the scope of this specification.

1.3 Glazed brick are prismatic units available in a variety of sizes, textures, colors, and shapes. Glazed brick are manufactured from clay, shale, or similar naturally occurring earthy substances and subjected to a heat treatment at elevated temperatures (firing). The heat treatment shall develop a fired bond between the particulate constituents to provide the strength and durability requirements of this specification (see firing, fired bond, glaze, and incipient fusion in Terminology C43).

1.4 Glazed brick are shaped during manufacture by molding, pressing, or extrusion, and the shaping method is a way to describe the brick.

1.5 Glazed brick are classified into one of two grades, one of two types, and one of two classes.

1.6 Opacity of the glaze is not required unless specified by the purchaser.

1.7 The text of this standard references notes and footnotes which provide explanatory material. These notes and footnotes (excluding those in tables and figures) shall not be considered as requirements of this standard.

1.8 The values stated in inch-pound units are to be regarded as the standard. The values given in parentheses are for information only.

1.9 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.


SDO ASTM: ASTM International
Document Number C1405
Publication Date Sept. 10, 2001
Language en - English
Page Count 5
Revision Level 01
Supercedes
Committee C15.02
Publish Date Document Id Type View
March 1, 2023 C1405-23 Revision
June 1, 2022 C1405-22 Revision
Feb. 1, 2020 C1405-20A Revision
Jan. 1, 2020 C1405-20 Revision
May 1, 2019 C1405-19 Revision
June 1, 2016 C1405-16 Revision
March 1, 2015 C1405-15 Revision
Feb. 1, 2014 C1405-14 Revision
July 1, 2012 C1405-12 Revision
June 15, 2010 C1405-10 Revision
Nov. 1, 2008 C1405-08 Revision
June 1, 2007 C1405-07 Revision
Nov. 15, 2005 C1405-05A Revision
May 15, 2005 C1405-05 Revision
Aug. 1, 2004 C1405-04 Revision
Dec. 10, 2002 C1405-02 Revision
Sept. 10, 2001 C1405-01B Revision
Sept. 10, 2001 C1405-01A Revision
Sept. 10, 2001 C1405-01 Revision
Sept. 10, 2001 C1405-00A Revision