Logo

ASTM C14-11

Historical Revision

Standard Specification for Nonreinforced Concrete Sewer, Storm Drain, and Culvert Pipe

$73.00

$73.00

$131.40

$0.00

$0.00

$0.00



Sub Total (1 Item(s))

$ 0.00

Estimated Shipping

$ 0.00

Total (Pre-Tax)

$ 0.00


Stay effortlessly up-to-date with the latest standard revisions. When new versions are released, they're automatically charged and delivered to you, ensuring seamless compliance.

...

1.1 This covers nonreinforced concrete pipe intended to be used for the conveyance of sewage, industrial wastes, storm water, and for the construction of culverts.

1.2 A complete metric companion to Specification C14 has been developedC14M; therefore, no metric equivalents are presented in this specification.

Note 1—This specification is a manufacturing and purchase specification only and does not include requirements for bedding, backfill, or the relationship between field load conditions and the strength classification of pipe. However, experience has shown that the successful performance of this product depends upon the proper selection of the class of pipe, type of bedding and backfill, and care that the installation conforms to the construction specifications. The owner is cautioned that he must correlate the field requirements with the class of pipe specified and provide for or require inspection at the construction site.


This specification covers nonreinforced concrete pipe intended to be used for the conveyance of sewage, industrial wastes, storm water, and for the construction of culverts. Pipe manufactured according to this specification shall be of three classes of nonreinforced concrete pipe identified as Class 1, Class 2, and Class 3. These pipes shall conform to the strength requirements given in this specification. The acceptability of the pipe shall be determined by the results of the following tests: strength test; absorption test; permeability test; and hydrostatic test. Concrete design shall conform to the physical and dimensional requirements for minimum wall thickness, and minimum three-edge bearing strength. The concrete shall consist of cementitious materials, mineral aggregates, and water. The aggregates shall be sized, graded, proportioned, and mixed with such proportions of cementitious materials and water as will produce a homogeneous concrete mixture of such quality that the pipe will conform to the test and design requirements of this specification. Pipe shall be subjected to either steam curing, water curing, or membrane curing. Special shapes or fittings such as wyes, tees, bends, and adapters for use with concrete pipe conforming to this specification shall conform to the applicable requirements for concrete pipe of corresponding class and internal diameter. Joints shall be compatible with those used in adjoining concrete pipes. Fabricated branches for wyes and tees shall be securely attached to the wall of the pipe in such a manner as not to restrict or otherwise interfere with the flow characteristics of the pipe.


SDO ASTM: ASTM International
Document Number C14
Publication Date Sept. 1, 2011
Language en - English
Page Count 4
Revision Level 11
Supercedes
Committee C13.01
Publish Date Document Id Type View
May 1, 2020 C0014-20 Revision
Oct. 1, 2015 C0014-15A Revision
Jan. 1, 2015 C0014-15 Revision
Feb. 1, 2014 C0014-14 Revision
Sept. 1, 2011 C0014-11 Revision
June 1, 2007 C0014-07 Revision
Dec. 1, 2005 C0014-05A Revision
Oct. 15, 2005 C0014-05 Revision
July 10, 2003 C0014-03 Revision
Aug. 10, 1999 C0014-99 Revision
Not Available C0014-81 Revision