Logo

ASTM C1272-11a

Historical Revision

Standard Specification for Heavy Vehicular Paving Brick

$73.00

$73.00

$131.40


Sub Total (1 Item(s))

$ 0.00

Estimated Shipping

$ 0.00

Total (Pre-Tax)

$ 0.00


Stay effortlessly up-to-date with the latest standard revisions. When new versions are released, they're automatically charged and delivered to you, ensuring seamless compliance.

...

1.1 This specification covers brick intended for use as a paving material in areas with a high volume of heavy vehicular traffic. The units are designed for use in such places as streets, commercial driveways, and aircraft taxiways. These units are not intended for applications covered by Specifications C410 or C902.

1.2 Units are manufactured from clay, shale, or similar naturally occurring earthy substances and subjected to a heat treatment at elevated temperatures (firing). The heat treatment must develop sufficient fired bond between the particulate constituents to provide the strength and durability requirements of this specification (see Terminology C1232).

1.3 Brick may be shaped during manufacture by extruding, molding, or pressing. Brick may have spacing lugs, chamfered edges, or both.

1.4 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.


This specification covers heavy vehicular paving bricks designed for use in streets, commercial driveways, aircraft taxiways, and other places where there is a high volume of heavy vehicular traffic. The bricks should be manufactured from clay, shale, or similar naturally occurring earthy substances and subjected to firing. The high temperature heat treatment should develop sufficient fired bonds between the material particles to produce the required strength and durability. The bricks may also be shaped by extruding, molding, or pressing during manufacture and may have spacing lugs, chamfered edges, or both. The materials are classified into two types according to the intended installation and should all conform to the required values of freeze thaw resistance, abrasion resistance, skid resistance, coring, chips or cracks, and efflorescence.


SDO ASTM: ASTM International
Document Number C1272
Publication Date Dec. 1, 2011
Language en - English
Page Count 4
Revision Level 11a
Supercedes
Committee C15.02
Publish Date Document Id Type View
Dec. 1, 2022 C1272-22A Revision
July 1, 2022 C1272-22 Revision
Dec. 1, 2021 C1272-21 Revision
June 1, 2017 C1272-17 Revision
Dec. 1, 2016 C1272-16B Revision
June 1, 2016 C1272-16A Revision
Jan. 15, 2016 C1272-16 Revision
Dec. 1, 2015 C1272-15 Revision
Dec. 15, 2014 C1272-14B Revision
Sept. 1, 2014 C1272-14A Revision
Feb. 1, 2014 C1272-14 Revision
Dec. 1, 2011 C1272-11A Revision
Aug. 1, 2011 C1272-11 Revision
June 1, 2010 C1272-10 Revision
June 1, 2007 C1272-07 Revision
Dec. 15, 2005 C1272-05A Revision
May 15, 2005 C1272-05 Revision
June 1, 2004 C1272-04A Revision
Feb. 1, 2004 C1272-04 Revision
June 10, 2002 C1272-02 Revision
June 10, 2000 C1272-00 Revision