Logo

ASTM C114-11b

Historical Revision

Standard Test Methods for Chemical Analysis of Hydraulic Cement

$119.00

$119.00

$214.20


Sub Total (1 Item(s))

$ 0.00

Estimated Shipping

$ 0.00

Total (Pre-Tax)

$ 0.00


Stay effortlessly up-to-date with the latest standard revisions. When new versions are released, they're automatically charged and delivered to you, ensuring seamless compliance.

Document Preview Not Available...

1.1 These test methods cover the chemical analyses of hydraulic cements. Any test methods of demonstrated acceptable precision and bias may be used for analysis of hydraulic cements, including analyses for referee and certification purposes, as explained in Section 4. Specific chemical test methods are provided for ease of reference for those desiring to use them. They are grouped as Reference Test Methods and Alternative Test Methods. The reference test methods are long accepted classical chemical test methods which provide a reasonably well-integrated basic scheme of analysis for hydraulic cements. The alternative test methods generally provide individual determination of specific analytes and may be used alone or as alternates and determinations within the basic scheme at the option of the analyst and as indicated in the individual method.

1.2 Contents:

SectionSubject
2Referenced Documents
4Description of Referee Analyses
4.1Referee Analyses
5Qualification for Different Analyses
5.1Certified Reference Materials
5.2Requirements for Qualification Testing
5.3Alternative Analyses
5.4Performance Requirements for Rapid Test Methods
6General
6.1Interferences and Limitations
6.2Apparatus and Materials
6.3Reagents
6.4Sample Preparation
6.5General Procedures
6.6Recommended Order for Reporting Analyses
Reference Test Methods
7Insoluble Residue
8Silicon Dioxide
8.2Cements with Insoluble Residue Less Than 1 %
8.3Cements with Insoluble Residue Greater Than 1 %
9Ammonium Hydroxide Group
10Ferric Oxide
11Phosphorus Pentoxide
12Titanium Dioxide
13Zinc Oxide
14Aluminum Oxide
15Calcium Oxide
16Magnesium Oxide
17Sulfur
17.1Sulfur Trioxide
17.2Sulfide
18Loss On Ignition
18.1Portland Cement
18.2Portland Blast-Furnace Slag Cement and Slag Cement
19Sodium and Potassium Oxides
19.1Total Alkalis
19.2Water-Soluble Alkalis
20Manganic Oxide
21Chloride
22Chloroform-Soluble Organic Substances
Alternative Test Methods
23Calcium Oxide
24Carbon Dioxide
25Magnesium Oxide
26Loss on Ignition
26.1Portland Blast-Furnace Slag Cement and Slag Cement
27Titanium Dioxide
28Phosphorus Pentoxide
29Manganic Oxide
30Free Calcium Oxide
Appendices Title
Appendix X1Example of Determination of Equivalence Point
for the Chloride Determination
Appendix X2CO2 Determinations in Hydraulic Cements


1.3 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.

1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. See 8.3.2.1 and 16.4.1 for specific caution statements.

These test methods cover the chemical analyses of hydraulic cements. Specific chemical test methods are grouped as reference test methods and alternative test methods. The reference test methods are long accepted classical chemical test methods which provide a reasonably well-integrated basic scheme of analysis for hydraulic cements and are also required for referee analysis in those cases where conformance to chemical specification requirements are questioned. Apparatus and materials for the test method include balance, weights, glassware and laboratory containers, desiccators, filter paper, crucibles, and muffle furnace. Standard reagents for the test method shall be used within the limits of the specification. These reagents shall include purity agents, water, repackaged reagents, concentrated acids and ammonium hydroxide, nonstandardized solutions, and indicator solutions. Sample preparation and general test procedures shall be followed according to the specification. General procedures include sample weighing, taring of crucibles, weighing of ignited residues, volatilization of platinum, chemical analyses, and calculation. Reporting of analyses shall be of the following order: major components, minor components, and separate determinations. Reference test methods and procedures include determination of insoluble residue, silicon dioxide, ammonium hydroxide group, ferric oxide, phosphorus pentoxide, titanium dioxide, zinc oxide, aluminum oxide, calcium oxide, magnesium oxide, sulfur, loss on ignition, sodium and potassium oxides, manganic oxide, chloride, chloroform-soluble organic substances. Alternative test methods and procedures include determination of calcium oxide, calcium dioxide, magnesium oxide, loss on ignition, titanium dioxide, phosphorus pentoxide, manganic oxide, and free calcium oxide. The standardization used for qualification and for analysis of each constituent shall be determined by valid curve-fitting procedures.


SDO ASTM: ASTM International
Document Number C114
Publication Date Aug. 1, 2011
Language en - English
Page Count 32
Revision Level 11b
Supercedes
Committee C01.23
Publish Date Document Id Type View
June 1, 2024 C0114-24 Revision
Oct. 1, 2023 C0114-23 Revision
Dec. 15, 2022 C0114-22 Revision
May 1, 2018 C0114-18 Revision
April 15, 2015 C0114-15 Revision
Oct. 1, 2013 C0114-13 Revision
Aug. 1, 2011 C0114-11BE01 Revision
Aug. 1, 2011 C0114-11B Revision
April 1, 2011 C0114-11A Revision
Feb. 1, 2011 C0114-11 Revision
Dec. 1, 2010 C0114-10A Revision
Feb. 1, 2010 C0114-10 Revision
Dec. 15, 2009 C0114-09B Revision
Dec. 1, 2009 C0114-09A Revision
Feb. 1, 2009 C0114-09 Revision
July 15, 2007 C0114-07 Revision
Nov. 1, 2006 C0114-06E01 Revision
Nov. 1, 2006 C0114-06 Revision
Jan. 1, 2005 C0114-05 Revision
July 1, 2004 C0114-04A Revision
Jan. 1, 2004 C0114-04 Revision
Jan. 10, 2003 C0114-03 Revision
June 10, 2000 C0114-00 Revision