Logo

ASTM C110-09

Historical Revision

Standard Test Methods for Physical Testing of Quicklime, Hydrated Lime, and Limestone

$119.00

$119.00

$214.20


Sub Total (1 Item(s))

$ 0.00

Estimated Shipping

$ 0.00

Total (Pre-Tax)

$ 0.00


Stay effortlessly up-to-date with the latest standard revisions. When new versions are released, they're automatically charged and delivered to you, ensuring seamless compliance.

Document Preview Not Available...

1.1 These test methods cover physical testing of quicklime and hydrated lime, and of limestone not otherwise covered in ASTM standards.

Note 1—Quicklime and hydrated lime have a high affinity for moisture and carbon dioxide. Caution should be taken to protect both hydrated and quicklime during sampling, storage, and testing (see Practice C 50).

1.2 The test procedures appear in the following order:

Section
Air Entrainment 8
Apparent Loose Density of Hydrated Lime, Pulverized
Quicklime, and Limestone

20
Apparent Packed Density of Hydrated Lime, Pulverized
Quicklime, and Limestone

21
Autoclave Expansion of Hydrated Lime 9
Dry Brightness of Pulverized Limestone 12
Dry Screening by Air Jet Sieve 18
Fineness of Pulverized Quicklime and Hydrated Lime by Air
Permeability

16
Limestone Grindability 13
Particle Size of Pulverized Limestone 17
Plasticity of Lime Putty 6
Popping and Pitting of Hydrated Lime 10
Residue and Sieve Analysis 15
Settling Rate of Hydrated Lime14
Slaking Rate of Quicklime 11
Specific Gravity of Hydrated Lime Products22
Standard Consistency of Lime Putty 5
Water Retention of Hydrated Lime 7
Wet Sieve Analysis of Agricultural Liming Materials19

1.3 The values stated in SI units are to be regarded as standard. The values given in parentheses are mathematical conversions to inch-pound units that are provided for information only and are not considered standard.

1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

These test methods cover physical testing of quicklime, hydrated lime, and limestone. Plastic property testing shall include test methods for standard consistency and plasticity of lime putty, water retention of hydrated lime, and air entrainment. Soundness testing shall include test methods for autoclave expansion, and popping and pitting of hydrated lime. Application testing shall include test methods for slaking rate of quicklime, dry brightness of pulverized limestone, limestone grindability determination by the laboratory ball mill method, and settling rate of hydrated lime. Particle size analysis shall include test methods for residue and sieve analysis, fineness of pulverized quicklime and hydrated lime by air permeability, particle size of pulverized limestone, and dry screening of hydrated lime, pulverized quicklime, and limestone by air jet sieving. Density measurement shall include the following test methods: apparent loose density, and apparent packed density of hydrated lime, pulverized quicklime, and limestone; specific gravity of hydrated lime products; and wet sieve analysis of agricultural liming materials.


SDO ASTM: ASTM International
Document Number C110
Publication Date March 1, 2009
Language en - English
Page Count 23
Revision Level 09
Supercedes
Committee C07.06
Publish Date Document Id Type View
June 1, 2024 C0110-24 Revision
Dec. 1, 2020 C0110-20 Revision
Dec. 1, 2016 C0110-16E01 Revision
Dec. 1, 2016 C0110-16 Revision
June 1, 2015 C0110-15E01 Revision
June 1, 2015 C0110-15 Revision
Dec. 1, 2014 C0110-14E01 Revision
Dec. 1, 2014 C0110-14 Revision
June 1, 2011 C0110-11 Revision
Dec. 1, 2010 C0110-10 Revision
June 15, 2009 C0110-09A Revision
March 1, 2009 C0110-09 Revision
Dec. 1, 2008 C0110-08A Revision
June 1, 2008 C0110-08 Revision
June 1, 2006 C0110-06 Revision
Nov. 15, 2005 C0110-05A Revision
May 1, 2005 C0110-05 Revision
June 1, 2004 C0110-04 Revision
Aug. 10, 2003 C0110-03 Revision
Dec. 10, 2002 C0110-02A Revision
June 10, 2002 C0110-02 Revision
June 10, 2000 C0110-00A Revision
Jan. 1, 2000 C0110-00 Revision